Bosch Appliances BLCC110U Call/Answer RAS, Call Forward On/Off, Check Web Email, Email System Log

Communication / Reporting

Programming options in this section relate to how you alarm syetm will communicate alarm information. Your installer will advise you on the exact makeup and configuration of your system.

Comms > Commands >

Call/Answer RAS MENU 5-0-1

This menu allows you to initiate a modem call to the installer’s off-site computer for programming changes or updates. Your installer may request that you enter this command so that they can remotely service and configure you system. You should not enter this command unless requested to do so.

Comms > Commands >

Call Forward On/Off MENU 5-0-2

This menu allows you to turn on and off the call forward feature. When you turn on call forwarding, the Solution 64 control panel will automatically activate and de-activate the call forward on and call forward off sequence accordingly when you turn Area 1 All On and off (arm and disarm).

Enter programming mode (PIN + MENU) then,

1.Enter [MENU] + [5] + [0] + [2].

If the call forward status is off, the keypad will display:

Call Forward On/Off

Call Forward is OFF,

To turn ON, Press ON.

To Go Back Press OK

If the call forward status is on, the keypad will display:

Call Forward On/Off

Call Forward is ON,

To turn OFF, Press OFF.

To Go Back Press OK

2.To toggle call forward on, press the [ON] key or press the [OFF] key to turn call forward off.

3.Press [OK] to save and exit, or press [MENU] to cancel.

Comms > Commands >

Check Web Email	MENU	5-0-3
Reserved for future use
Comms > Commands >
Email System Log	MENU	5-0-4

Reserved for future use

	Solution 64 User Guide
Comms > Commands >
Set Domestic Phone Number		MENU 5-1-5

Domestic reporting allows the Solution 64 control panel to send reports to personal telephone numbers (eg. mobile telephone numbers). Up to three different telephone numbers can be programmed, each having a maximum of 32 digits.

A telephone call needs to be acknowledged by the user that answers the incoming call. If the user fails to acknowledge the call, the Solution 64 control panel will make another attempt to report until the maximum number of call attempts are reached. To acknowledge the call, the user needs to press the [#] key on their telephone.

Enter programming mode (PIN + MENU) then,

1.Enter [MENU] + [5] + [1] + [5].

If the control panel is configured to report via domestic format, the keypad will display the following:

Domestic Reports Not

Enabled. Please contact

Your Security Service

Provider

If the control panel has been configured to report via domestic format, the keypad will display information for telephone number 1.

Domestic Phone Number 1

631728_

Press  0-9 OK to SAVE

2.Using the numeric keys, enter all the digits of the first telephone number.

You can change a single digit by scrolling the cursor left [←] and right [→]. For special characters (eg. , = pause * or # etc), use the [↑] and [↓] keys. To clear all text from the cursor position to the right, press the [OFF] key.

3.Press [OK] to program telephone number 2.

Domestic Phone Number 2

4331_

Press  0-9 OK to SAVE

4.Using the numeric keys, enter all the digits of the second telephone number (if required).

You can change a single digit by scrolling the cursor left [←] and right [→]. For special characters (eg. , = pause * or # etc), use the [↑] and [↓] keys. To clear all text from the cursor position to the right, press the [OFF] key.

5.Press [OK] to program telephone number 3.

Bosch Security Systems 09/06 BLCC110U 21