Solution 64 
User Guide
System > System Testing >
Walk Test All Zones | MENU |
This menu allows you to test all zones within an area at the same time.
Enter programming mode (PIN + MENU) then,
1.Press [MENU] + [7] + [9] + [0].
The keypad will display a list of areas that are available to walk test zones.
2.Use the [↑] and [↓] keys to select the area that you want to do walk test, then press [OK] to select. Alternatively, you can enter the area number, then press [OK].
The keypad will scroll all zones that you can test.
To test Z001 open then close Zone 1 Name
Press OK or MENU
To test Z002 open then close Zone 1 Name
Press OK or MENU
3.Open and close each zone that needs to be tested. A zone that has been successfully tested will no longer scroll on the keypad display.
When all zones have been tested, the keypad will display:
Selected zones have been
Tested OK
Press OK or MENU
4.Press [OK] to save and exit, or press [MENU] to exit without saving.
System > System Testing >
Battery Test | MENU |
This menu allows you to manually test the systems back up battery. The Solution 64 will automatically test the battery once per day and every time the system is armed.
The battery test can take up to two minutes to complete and the keypad will display the voltage of the battery during the test.
Enter programming mode (PIN + MENU) then,
1.Press [MENU] + [7] + [9] + [2].
The keypad will display the battery voltage whilst under test:
Battery test in progress.
Please wait..
Voltage = 13.4V
To Go Back Press OK
If the battery has passed the test, the keypad will display:
Battery test Passed.
Press OK to continue
If the battery has failed the test, the keypad will display:
Battery test Failed.
Please Call for Service.
Press OK to continue
2.Press [OK] to exit.
28 | Bosch Security Systems |
09/06
BLCC110U