Bosch Appliances D9412GV2 manual 12.6.1 D9133DC Direct Connect Programming Module

Page 59

D9412GV2/D7412GV2 Operation and Installation Guide 12.0

SDI Devices

 

 

Figure 27: DX4020i DIP Switch Settings

2. Connect D9133DC to Com Port 1 or Com Port 2

on the PC. The D9133DC has a DB-9 female serial

connector. A null-modem cable must be purchased

1

P3

2

LED

ENABLE

Rx Tx

Tx Rx

BUS

SER

 

P2

P6

 

 

 

 

 

 

 

P1

 

 

 

 

 

 

DB9 GND

 

 

 

 

 

 

ENABLE

ON

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

1

2

3

4

5

6

7

8

1

2

4

8

16

32

64

128

4

separately to connect the D9133DC to a PC.

3. Using 0.8 mm (22 AWG) or 1.2 mm (18 AWG)

wire, connect the D9133DC SDI terminals (SDI

PWR, SDI A, SDI B, and SDI COM) to the

control panel’s SDI terminals (Terminals 29 to 32).

To send or receive the control panel’s program, place the Reset Pin in the Locked or Unlocked position.

Locking the Reset Pin when programming the control panel improves the uploading and downloading times.

1 - Address DIP switches

2 - OFF position

3 - ON position

4 - SDI Address 80 switch settings

12.5.3 Supervision

Supervision of the serial interface module is available through programming. Supervision is not required to use a DX4010i or a D9133.

If supervised, and the serial interface module does not respond to control panel supervision polls, the control panel sends an SDI Failure Report to the receiver. If it fails to communicate with the DX4010i or the D9133, SERVC SDI 80 displays at the keypad. The SDI Failure Report includes the address of the troubled module indicating which module needs service.

12.6SDI Address 88

SDI Address 88 is available with the D9412GV2 and D7412GV2 Control Panels and is used for several different applications. When using SDI Address 88, connect only one listed device at a time.

12.6.1D9133DC Direct Connect Programming Module

Use the D9133DC Direct Connect Programming Module to handle local programming of the D9412GV2 and D7412GV2 Control Panels. In addition, the D9133DC allows diagnostic and history retrieval. D9133DC is not UL Listed.

Connecting the D9133DC

1.Configure D9133DC for SDI Address 88. To program the control panel when the reset pin is in the unlocked position, program Enable SDI RPS to Yes in the GV2AUX handler.

Used as an External Modem

The D9133DC can operate as an external modem when using Remote Programming Software (RPS) with the control panel. Refer to the D9412GV2/D7412GV2 Program Entry Guide (P/N: F01U003636) for programming details.

12.6.2 Network Interface Modules

The Bosch Security Systems DX4020 Network Interface Module and D9133TTL-E Network Interface Module are four-wire powered SDI devices that provide connection for two-way communication over Ethernet networks to D9412GV2 and D7412GV2.

For programming information on enhanced communications, refer to the D9412GV2/D7412GV2 Program Entry Guide (P/N: F01U003636).

The DX4020 can be installed up to 305 m (1000 ft) from the control panel using 0.8 mm (22 AWG) wire.

The D9133TTL-E can be installed up to 305 m (1000 ft) from the control panel using 1.2 mm (18 AWG) wire.

Bosch Security Systems, Inc. 5/05 F01U003641B

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents D9412GV2/D7412GV2 Operation and Installation GuideFederal Communications Commission FCC Rules TrademarksCertifications and Approvals Listings and ApprovalsBosch Security Systems, Inc /05 F01U003641B Contents D9412GV2/D7412GV2 Operation and Installation Guide Tables FiguresRelated Documentation IntroductionEffects Precautions during InstallationLightning Strikes GV2 Series Control Panel Differences Configuration and PartsOverview Parts Available by Separate Order Parts ListAssembly Literature PackCompatible Accessories AccessoriesFeatures in the D9412GV2 and D7412GV2 Ground Fault Detection Added Feature KeyswitchAccess Control Ground Fault DetectionProgramming Other FeaturesNetCom Functions Mounting Enclosure InstallationInstallation Preparation Enclosure OptionsTerminal Installing the Control PanelConnecting Earth Ground Terminals to earth ground Ground Fault Detect EnableGround Fault Impedance Enabling Ground Fault DetectionGround Fault Detection Status 4 D9412GV2 and D7412GV2 Ground Fault SpecificationsCompleting the Installation Programming the Control Panel Installing the Point Chart LabelTesting the System Secondary Power Terminals Power SupplyPrimary Power Terminals 1 Installing the Battery Replacing the Battery Non-Power-Limited WiringBattery Discharge and Recharge Schedule Battery SupervisionBattery Charging Circuit Float Charge Charging Status and Low Battery LEDs Programmable Power Output Terminals 6, 7, Power OutputsTotal Available Power Continuous Power Output Terminals 24,Terminals 6 Available PowerFire System Power Formula Verification/Reset RelayLocation Telephone ConnectionsRegistration NotificationTelephone Line Monitor Phone LED RedOperation Monitor LED Green Dialing FormatOperation 11 D928 Dual Phone Line SwitcherDescription Telephone Connections Installing the D928 MountingWiring AC Power LEDPoint Parameters On-Board PointsTerminals 11 to 22 Description Point Sensor LoopsPoint Response Time 3 4 5 Point Zonex Bus D9412GV2 Terminals and D7412GV2 Terminals Off-Board PointsListings Off-Board Point ErrorsD8125, D8127 and D9127 Popit Modules 5 D9412GV2/D7412GV2 Responses to Missing Point ConditionsConnecting the D8125 Popex to the D9412GV2 Control Panel Connecting the D8125 Popex to the D7412GV2 Panel Data Expansion Loop Wire Specifications Installing the D8125 Popex ModuleWiring the D8125 to the Control Panel Wiring POPITs to the Data Expansion LoopPopit Module Point Assignments Wiring Data Expansion Loops to Popex ModulesPopit Sensor Loops D8128D OctoPOPIT Module Address Switches InstallationSetting the OctoPOPIT Switches Mounting OctoPOPITs D8128D OctoPOPIT Switch Settings for D9412GV2 and D7412GV2Point DIP Switches Wiring OctoPOPITsTerminal Strip Connections Using the Terminal StripConnecting D8128D OctoPOPITs to the D9412GV2 First address on Zonex Bus Sensor loops OctoPOPIT Sensor Loops Using Molex ConnectorsD8128D OctoPOPIT Sensor Loops Testing Off-Board Points10.1 D8129 OctoRelay Off-Board RelaysSetting the OctoRelay switches or Configuring the D8129 OctoRelayD8129 OctoRelay Switch Settings Relay outputs can activate when you areNumber of D8128Ds Used with D8129s Wiring ConnectionsOutputs when you perform this function 10.2 D811 Arm Status Relay ModuleD811 for Relay On-board points D811 for Relay Keypad Terminals 29 to Arming DevicesDescription Extra Power for More Keypads Wire Limits for Individual KeypadsMaintained Contact KeyswitchSilencing the Bell Momentary Contact12.4 D9210B Wiegand Control Interface Module InstallationSDI Devices 12.3 D9131A Parallel Printer Interface ModuleSDI Address AccessAddress Switch Settings for Access Control Module Address SettingsNetwork Interface Modules Connecting the D9133DC12.6.1 D9133DC Direct Connect Programming Module Used as an External ModemDX4020 DIP Switch Settings Accessory Connector Programmer and Accessory ConnectionsProgrammer Connector Programmer Access Reports14.1 D9412GV2 Faceplate FaceplatesD7412GV2 14.2 D7412GV2 FaceplateD9412GV2 Control Panel Appendix a System Wiring Diagrams, Issue aD9412GV2 Popex D7412GV2 Control Panel D7412GV2, Power Supply SideUL Smoke Detector Compatibility P/N 33284 for D7412GV2, Input Points and Peripheral DevicesD7412GV2, SDI Devices Zonex 1 Point Address Chart Appendix B Point Address ChartsZonex 2, Points 129 to 247 D9412GV2 Only Zonex 2 Point Address ChartD9412GV2/D7412GV2 Program Entry Guide P/N F01U003636 SpecificationsBosch Security Systems, Inc /05 F01U003641B Bosch Security Systems F01U003641B
Related manuals
Manual 158 pages 17.38 Kb

D9412GV2 specifications

The Bosch D9412GV2 is an exceptional dishwasher that stands out in the competitive world of home appliances. Known for its reliability and advanced features, this model offers a blend of cutting-edge technology and user-friendly design that appeals to modern households.

One of the most noteworthy features of the D9412GV2 is its impressive cleaning performance. Boasting a unique combination of powerful jets and specialized wash cycles, it ensures that even the toughest stains are removed effectively. The dishwasher features Bosch’s patented PrecisionWash system, which utilizes intelligent sensors to monitor the wash cycle’s progress and adjust the water spray for optimal cleaning results. This not only guarantees sparkling dishes but also conserves water and energy.

In terms of capacity, the D9412GV2 does not disappoint. It has a spacious interior that is designed to accommodate up to 16 place settings, making it an ideal choice for families or those who frequently entertain guests. The adjustable racks and flexible loading options allow users to maximize space and customize the dishwasher to suit their unique needs. The third rack is particularly useful for utensils and smaller items, providing additional space that enhances efficiency.

The dishwasher is also engineered with noise reduction features for a quieter operation. With a sound rating of 44 decibels, it operates silently in the background, allowing for uninterrupted conversations and a peaceful home environment. This is especially beneficial for open-concept living spaces.

Energy efficiency is another hallmark of the Bosch D9412GV2. It is Energy Star certified, reflecting its commitment to sustainable practices. It uses less water and electricity without compromising performance, making it a responsible choice for eco-conscious consumers.

Moreover, the presence of the Home Connect feature allows users to control and monitor their dishwasher remotely via a smartphone app. This innovative technology enables users to start or stop cycles, receive notifications, and even download new wash programs, adding convenience and flexibility to busy lifestyles.

In conclusion, the Bosch D9412GV2 is a state-of-the-art dishwasher that excels in cleaning performance, capacity, and energy efficiency. With its innovative technologies and thoughtful design, it represents Bosch's commitment to quality and customer satisfaction, making it a valuable addition to any kitchen.
Top Page Image Contents