Bosch Appliances D9412GV2 10.2 D811 Arm Status Relay Module, Wiring Connections, Relay Output

Page 50

D9412GV2/D7412GV2 Operation and Installation Guide 10.0 Off-Board Relays

To install OctoRelays in the enclosure with the control panel:

1.Align the module with one of the mounting locations in the enclosure (refer to Figure 2 on page 9).

2.Using the screws provided with the module, secure the module in the enclosure.

Use the D137 Mounting Bracket or D9002 Mounting Skirt to install OctoRelays in enclosures with no available module mounting locations.

10.1.4 Wiring Connections

Power down the control panel to connect OctoRelays. Refer to Figure 20 on page 48 and Figure 21 on page 49.

Table 19: Number of D8128Ds Used with D8129s

 

 

If the number of

Do not connect more than

D8128Ds connected to a

this number of D8129s:

single Zonex bus is:

 

9

6

10

5

11

4

12

3

13

1

14

1

OctoRelays for Relays 1 to 64 connect to

Zonex 1, Terminal 28.

OctoRelays for Relays 65 to 128 connect to Zonex 2, Terminal 26 on the D9412GV2 only.

Only one OctoRelay is shown wired to each Zonex bus in Figure 20 on page 48and Figure 21 on page 49. Wire additional OctoRelays in parallel. Review Section 6.0 Power Outputs on page 25 for information about providing enough power for the relays.

The number of D8129 OctoRelays that can be connected to each Zonex terminal on the D9412GV2 control panels is limited by the number of D8128D OctoPOPITs connected.

Using D8129 OctoRelays and D8128D OctoPOPITs together on the same Zonex terminals is limited and depends on the number of D8128 OctoPOPITs and D8129 OctoRelays connected to a single Zonex Bus.

Refer to Table 19 for information about the maximum number of D8128Ds and D8129s you can connect to a single Zonex bus.

10.2D811 Arm Status Relay Module

The D811 Arm Status Relay Module allows the addition of a single off-board relay output to the system. Alarm output, auxiliary relay, sensor reset, arming status, point status, alarm memory, or remote functions can be assigned to the D811 relay output. It is not restricted to the Arming Status Mode only.

Relay Numbers for D811 Not Programmable: If the D811 is connected to Zonex 1, Terminal 28, use relay number 53 for the relay output. If the D811 is connected to Zonex 2, Terminal 26 on the D9412GV2, use relay number 117 for the relay output.

D811 Modules connect as shown in Figure 22 on page 51and Figure 23 on page 52. Review Section 6.0 Power Outputs on page 25 to ensure that enough power is provided for the powered devices that connect to the system. Refer to Relay Parameters in the D9412GV2/D7412GV2 Program Entry Guide

(P/N: F01U003636) for programming details.

D811 Restricted for Fire Systems: The D811 relay output is not supervised and cannot be used in fire or combined fire and burglary installations for primary indication devices.

10.2.1

Relay Output

 

Relay outputs can activate when you are

 

programming the control panel.

 

Disconnect equipment connected to relay

 

outputs when you perform this function.

Each D811 relay output provides a Form C dry contact rated for 1.0 A at 12 VDC. Normally-open, common, and normally-closed terminals are available. When an individual output is activated, continuity exists between the normally-open and common terminals. When the output is not activated, continuity exists between the normally-closed and common terminals.

50

Bosch Security Systems, Inc. 5/05 F01U003641B

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Operation and Installation Guide D9412GV2/D7412GV2Listings and Approvals TrademarksCertifications and Approvals Federal Communications Commission FCC RulesBosch Security Systems, Inc /05 F01U003641B Contents D9412GV2/D7412GV2 Operation and Installation Guide Figures TablesIntroduction Related DocumentationEffects Precautions during InstallationLightning Strikes GV2 Series Control Panel Differences Configuration and PartsOverview Literature Pack Parts ListAssembly Parts Available by Separate OrderAccessories Compatible AccessoriesFeatures in the D9412GV2 and D7412GV2 Ground Fault Detection KeyswitchAccess Control Ground Fault Detection Added FeatureProgramming Other FeaturesNetCom Functions Enclosure Options InstallationInstallation Preparation Mounting EnclosureTerminals to earth ground Ground Fault Detect Enable Installing the Control PanelConnecting Earth Ground Terminal4 D9412GV2 and D7412GV2 Ground Fault Specifications Enabling Ground Fault DetectionGround Fault Detection Status Ground Fault ImpedanceCompleting the Installation Programming the Control Panel Installing the Point Chart LabelTesting the System Secondary Power Terminals Power SupplyPrimary Power Terminals 1 Installing the Battery Non-Power-Limited Wiring Replacing the BatteryBattery Discharge and Recharge Schedule Battery SupervisionBattery Charging Circuit Float Charge Charging Status and Low Battery LEDs Continuous Power Output Terminals 24, Power OutputsTotal Available Power Programmable Power Output Terminals 6, 7,Verification/Reset Relay Available PowerFire System Power Formula Terminals 6Notification Telephone ConnectionsRegistration LocationDialing Format Phone LED RedOperation Monitor LED Green Telephone Line MonitorOperation 11 D928 Dual Phone Line SwitcherDescription AC Power LED Installing the D928 MountingWiring Telephone ConnectionsPoint Sensor Loops On-Board PointsTerminals 11 to 22 Description Point ParametersPoint Response Time 3 4 5 Off-Board Points Point Zonex Bus D9412GV2 Terminals and D7412GV2 Terminals5 D9412GV2/D7412GV2 Responses to Missing Point Conditions Off-Board Point ErrorsD8125, D8127 and D9127 Popit Modules ListingsConnecting the D8125 Popex to the D9412GV2 Control Panel Connecting the D8125 Popex to the D7412GV2 Panel Wiring POPITs to the Data Expansion Loop Installing the D8125 Popex ModuleWiring the D8125 to the Control Panel Data Expansion Loop Wire SpecificationsPopit Module Point Assignments Wiring Data Expansion Loops to Popex ModulesPopit Sensor Loops D8128D OctoPOPIT Module Address Switches InstallationSetting the OctoPOPIT Switches Wiring OctoPOPITs D8128D OctoPOPIT Switch Settings for D9412GV2 and D7412GV2Point DIP Switches Mounting OctoPOPITsUsing the Terminal Strip Terminal Strip ConnectionsConnecting D8128D OctoPOPITs to the D9412GV2 First address on Zonex Bus Sensor loops Using Molex Connectors OctoPOPIT Sensor LoopsTesting Off-Board Points D8128D OctoPOPIT Sensor LoopsOff-Board Relays 10.1 D8129 OctoRelayRelay outputs can activate when you are Configuring the D8129 OctoRelayD8129 OctoRelay Switch Settings Setting the OctoRelay switches or10.2 D811 Arm Status Relay Module Wiring ConnectionsOutputs when you perform this function Number of D8128Ds Used with D8129sD811 for Relay On-board points D811 for Relay Keypad Terminals 29 to Arming DevicesDescription Wire Limits for Individual Keypads Extra Power for More KeypadsKeyswitch Maintained ContactMomentary Contact Silencing the Bell12.3 D9131A Parallel Printer Interface Module InstallationSDI Devices 12.4 D9210B Wiegand Control Interface ModuleAddress Settings AccessAddress Switch Settings for Access Control Module SDI AddressUsed as an External Modem Connecting the D9133DC12.6.1 D9133DC Direct Connect Programming Module Network Interface ModulesDX4020 DIP Switch Settings Programmer Access Reports Programmer and Accessory ConnectionsProgrammer Connector Accessory ConnectorFaceplates 14.1 D9412GV2 Faceplate14.2 D7412GV2 Faceplate D7412GV2Appendix a System Wiring Diagrams, Issue a D9412GV2 Control PanelD9412GV2 Popex D7412GV2, Power Supply Side D7412GV2 Control PanelD7412GV2, Input Points and Peripheral Devices UL Smoke Detector Compatibility P/N 33284 forD7412GV2, SDI Devices Appendix B Point Address Charts Zonex 1 Point Address ChartZonex 2 Point Address Chart Zonex 2, Points 129 to 247 D9412GV2 OnlySpecifications D9412GV2/D7412GV2 Program Entry Guide P/N F01U003636Bosch Security Systems, Inc /05 F01U003641B Bosch Security Systems F01U003641B
Related manuals
Manual 158 pages 17.38 Kb

D9412GV2 specifications

The Bosch D9412GV2 is an exceptional dishwasher that stands out in the competitive world of home appliances. Known for its reliability and advanced features, this model offers a blend of cutting-edge technology and user-friendly design that appeals to modern households.

One of the most noteworthy features of the D9412GV2 is its impressive cleaning performance. Boasting a unique combination of powerful jets and specialized wash cycles, it ensures that even the toughest stains are removed effectively. The dishwasher features Bosch’s patented PrecisionWash system, which utilizes intelligent sensors to monitor the wash cycle’s progress and adjust the water spray for optimal cleaning results. This not only guarantees sparkling dishes but also conserves water and energy.

In terms of capacity, the D9412GV2 does not disappoint. It has a spacious interior that is designed to accommodate up to 16 place settings, making it an ideal choice for families or those who frequently entertain guests. The adjustable racks and flexible loading options allow users to maximize space and customize the dishwasher to suit their unique needs. The third rack is particularly useful for utensils and smaller items, providing additional space that enhances efficiency.

The dishwasher is also engineered with noise reduction features for a quieter operation. With a sound rating of 44 decibels, it operates silently in the background, allowing for uninterrupted conversations and a peaceful home environment. This is especially beneficial for open-concept living spaces.

Energy efficiency is another hallmark of the Bosch D9412GV2. It is Energy Star certified, reflecting its commitment to sustainable practices. It uses less water and electricity without compromising performance, making it a responsible choice for eco-conscious consumers.

Moreover, the presence of the Home Connect feature allows users to control and monitor their dishwasher remotely via a smartphone app. This innovative technology enables users to start or stop cycles, receive notifications, and even download new wash programs, adding convenience and flexibility to busy lifestyles.

In conclusion, the Bosch D9412GV2 is a state-of-the-art dishwasher that excels in cleaning performance, capacity, and energy efficiency. With its innovative technologies and thoughtful design, it represents Bosch's commitment to quality and customer satisfaction, making it a valuable addition to any kitchen.
Top Page Image Contents