Finisar AN-2030 specifications Identifier values, Extended Identifier, Connector

Page 5

AN-2030: Digital Diagnostic Monitoring Interface for Optical Transceivers

F i n i s a r

1Identifier

2The identifier value specifies the physical device described by the serial information.

3This value shall be included in the serial data. The defined identifier values are shown in

4table 3.2. Finisar SFP modules have this byte set to 03h. Finisar GBIC modules have

5this byte set to 01h.

6		TABLE 3.2: Identifier values
7
	Value	Description of physical device

	00h	Unknown or unspecified
	01h	GBIC
	02h	Module/connector soldered to motherboard
	03h	SFP
	04-7Fh	Reserved
	80-FFh	Vendor specific

8

9

10Extended Identifier

11The extended identifier value provides additional information about the transceiver.

12The field is set to 04h for all non-custom SFP and GBIC modules indicating serial ID

13module definition.

14

15Connector

16The connector value indicates the external connector provided on the interface. This

17value shall be included in the serial data. The defined connector values are shown in

18 table 3.3. Note that 01h – 05h are not SFP compatible, and are included for

19compatibility with GBIC standards. Finisar optical SFP modules currently have this byte

20set to 07h (optical LC connector). GBIC modules have the byte set to 01h (SC).

21

22

9/26/02 Revision D

Page 5

Image 5

Contents 35 2. Applicable Documents Scope and OverviewEnhanced Digital Diagnostic Interface Definition Overview Specific Data Field Descriptions Password Entry 8 bytesCal Constants Bytes Control Functions 8 bytesName Bytes Description of Field Address Serial ID Data Fields Address A0Data Identifier ConnectorIdentifier values Extended IdentifierDescription of connector Connector valuesTransceiver codes TransceiverEncoding 4a Sonet Reach SpecifiersSpeed Reach Specifier bit Description Code Description of encoding mechanismLength 9μ-km BR, nominalLength 9μ Length 50μVendor name Length CopperDwdm Channel Spacing Vendor OUIDwdm Wavelength Fraction Vendor RevLaser Wavelength Option values OptionsBR, max 13 BR, minData Description of field Address Diagnostic Monitoring TypeDate Code N i s a r Enhanced Options 11 SFF-8472 Compliance 10 I/O Timing for Soft Control & Status FunctionsSFF-8472 Compliance Diagnostics 13 Digital temperature format Temperature 12 Bit weights C for temperature reporting registersN i s a r 14 Alarm and Warning Thresholds 2-Wire Address A2h Alarm and Warning ThresholdsN i s a r 16b Format for offsets 16a Unsigned fixed-point binary format for slopes16d Example of Floating Point Representation 16c IEEE-754 Single-Precision Floating Point Number FormatBit Name Description LOS Alarm and Warning Flags18 Alarm and Warning Flag Bits 2-Wire Address A2h 20 User Eeprom 2-Wire Address A2h 19 Password Addresses 2-Wire Address A2hByte Bit Name Description Address # Bytes Name DescriptionDdtc Electrical Interface Definition Overview Wire Interface OperationN i s a r Current Address Read Detailed 2 -Wire Serial Port Operation N i s a r Wire Protocol Data Transfer Protocol Vcc = 3.15V to DC Electrical CharacteristicsFor More Information