Matrox Electronic Systems II manual VMChannel interface connector

		Board input and output connectors 99
Pin	Signal	I/O	Description
1, 3, 5, 7,	GND		Ground.
9, 11, 13,
21, 25,
27

The connector used is a 30-pin male, 0.050 pitch right angle connector. For customers planning to build their own cables, parts can be purchased from:

■ Manufacturer:	Fujitsu
■ Connector	FCN-217J030-G/O

This connector interfaces with a ribbon cable, 0.025 inch pitch (0.635 mm), AWG #30 (solid wire).

VMChannel interface connector

The VMChannel interface allows Matrox Meteor-II /Multi-Channel to share data with any Matrox imaging board that has a VMChannel interface capable of performing the bus controller function. A VMChannel backplane (available with the GEN-BUS/... interconnect kits) must be inserted across the VMChannel interfaces of the boards. For pinout information, see VMChannel interface connector in Appendix B.

Auxiliary power supply input

For pinout information, see Auxiliary power supply input in Appendix B.

Auxiliary power supply selection

For information, see Auxiliary power supply selection in Appendix B.