Matrox Electronic Systems II manual HDT44P

86 Appendix B: Technical information Matrox Meteor-II /Standard

Pin	Signal	I/O	Description	Form
				Factor
20	VID_IN9	I	Analog Video Input #9 or Y5	PCI
21	RTS	O	Request To Send (RS-232).	PCI, CompactPCI
22	RX	I	Receive (RS-232).	PCI, CompactPCI
23	VID_IN8	I	Analog Video Input #8 or Y4	PCI
24	USER(1)_OUT	O	Auxiliary User Output #1	PCI, CompactPCI
25-31	GND	-	Ground.	PCI, CompactPCI
33	VID_IN11	I	Analog Video Input #11 or Y6	PCI
34	OPTOTRIG-	I	Opto-Isolated trigger negative input.	PCI, CompactPCI
35	OPTOTRIG+	I	Opto-Isolated trigger positive input.	PCI, CompactPCI
36	TX	O	Transmit (RS-232).	PCI, CompactPCI
39	USER(1)_IN	I	Auxiliary User Input #1	PCI, CompactPCI
40	VID_IN7	I	Analog Video Input #7 or C3	PCI, CompactPCI
41	VID_IN6	I	Analog Video Input #6 or Y3	PCI, CompactPCI
42	GND	-	Ground.	PCI, CompactPCI
43	VID_IN4	I	Analog Video Input #4 or C2	PCI, CompactPCI
44	VID_IN2	I	Analog Video Input #2 or C1	PCI, CompactPCI
7, 10,	Not used			PCI, CompactPCI
12, 32,
37, 38

Use Matrox cable DBHD44-TO-13BNC to interface with this connector. The cable has thirteen BNC connectors, and a high-density 44-pin D-Subminiature male connector. This cable allows you to attach up to twelve analog video sources, and a trigger input.

An open-ended version of this cable, the DH44-TO-13BNC/O, is also available that can be used to access signals in addition to those described above. Parts for cables can be purchased from:

■ Manufacturer:	NorComp Interconnect Devices
■ Connector & shell:	HDT44P