Matrox Electronic Systems II manual VMChannel interface connector, Jumpers

Board input and output connectors 107

VMChannel interface connector

The VMChannel interface allows Matrox Meteor-II to share data with any Matrox imaging board that has a VMChannel interface capable of performing the bus controller function. A VMChannel backplane (available with the GEN-BUS/...

interconnect kits) must be inserted across the VMChannel interfaces of the boards. For pinout information, see VMChannel interface connector in Appendix B.

Jumpers

Each jumper connects a 100Ω termination resistor between the two polarities of the following signals:

Jumper B1 - B2: TRIG+, TRIG-

Jumper B3 - B6: VSYNC+, VSYNC-

Jumper B4 - B5: HSYNC+, HSYNC-

Jumper B7 - B8: CLKIN+, CLKIN-

Jumper

B2

B6

B5

B8

B1

B3

B4

B7