| | Matrox Meteor-II /Multi-Channel grab section 59 |
| | The video timing parameters (including those for progressive |
Performance | |
| | scan) supported by the Matrox Meteor-II /Multi-Channel board |
| | are as follows: | |
| | | |
| | | Max |
| | |
| | Number of pixels / line (including sync and blanking) 4096* |
| | |
| | Number of lines / frame (including sync and blanking) 4096* |
| | | |
| | Sampling rate (with external clock input, or in | 30 MSPS |
line-locking mode)
Note that the maximum number of pixels per line that MIL supports is:
Pixels≤
-------------- x Number of Lines 4 Mbytes
Line
Input channels
The Matrox Meteor-II /Multi-Channel has six independent analog channels. These channels can support input from two RGB or six monochrome cameras where the channels can be selected with the MIL-Lite MdigChannel() command.
Low-pass filter
The input low-pass filtering stage is used to limit high frequency noise and aliasing effects at the input of the triple A/D converter. The filter used on Matrox Meteor-II /Multi-Channel is a 4th order Butterworth filter with a cutoff frequency of 10 MHz.
Gain
Matrox Meteor-II /Multi-Channel has adjustable gains. This allows you to optimize the video input signal range.