Matrox Electronic Systems manual Matrox Meteor-II /Digital, VMChannel, Uart

Matrox Meteor-II boards 13

dual-tap configurations. It also accepts an external trigger, and can operate in either asynchronous reset mode or next valid frame/field mode.

The PCI form factor also includes an auxiliary power supply input, which can be used to draw auxiliary power from your computer to provide power to your camera.

Matrox Meteor-II /Digital

Matrox Meteor-II /Digital is a digital frame grabber for standard and non-standard video acquisition. This board is only available in a PCI form factor.

100-Pin Connector

9-Pin Female

Trigger

Connector

		32	RS-422/
	Data		LVDS*
			Receiver
	Clk input
	Clk output
	Hsync input
	Hsync output		RS-422/
	Vsync input
	Vsync output		LVDS*
Valid frames/line			Drivers
	Trigger
			&
Exposure timer1
Exposure timer2			Receivers
	Aux 1 input
	Aux 2 input
	Aux 1 output
	Aux 2 output
Exposure timer1
Exposure timer2			TTL
Camera CTRL1
Camera CTRL2			Buffers
Camera CTRL3
	Trigger
	Trigger		Opto-
			coupler

32

LUT

4256x8-bit or

2 4Kx16-bit

PSG

VMChannel

32

32

VIA

64

SGRAM

32

(4 MB)

	RX	RS-232
9-Pin Male	TX	Drivers
RS-232	/RTS	and
Connector
		Receivers
	/CTS
On separate bracket

UART

* Matrox Meteor-II is available with either RS-422 or LVDS support.

Host 32-bit PCI bus