Matrox Electronic Systems II manual Installation overview, More information, Conventions

Installation overview 21

Installation overview

	The installation procedure consists of the following steps:
	1. Complete the hardware installation as described in
	Chapter 2. If you have any problems, refer to Appendix A.
	2. Complete the software installation as described in
	Chapter 3.
	For information on using multiple Matrox Meteor-II boards,
More information
	refer to Chapter 4, and for in-depth hardware information, refer
	to Chapter 5.
	If you want technical information about Matrox Meteor-II,
	including specifications and connector descriptions, and
	pinouts, see Appendix B for Matrox Meteor-II /Standard,
	Appendix C for Matrox Meteor-II /Multi-Channel, Appendix D
	for Matrox Meteor-II /Digital, and Appendix E for Matrox
	Meteor-II /1394.
	A history of the development of Matrox Meteor-II is available
	in Appendix F.
	When the term Matrox Meteor-II boards is used, it refers to all
Conventions
	versions of the board.
	When the term Meteor-II for PC/104-Plusis used, it refers to
	the stand-alone version (MET2+/4 or MET2-MC+/4). Another
	version of Matrox Meteor-II is available pre-installed with
	Matrox 4Sight, and technical information for this board is
	available in the Matrox 4Sight User Guide.
	When the term Host is used in this manual, it refers to your
	computer.
	This manual occasionally makes reference to a MIL-Lite
	command. However, anything that can be accomplished with
	MIL-Lite can also be accomplished with MIL, ActiveMIL,
	ActiveMIL-Lite, or Matrox Inspector.1

1. Most items can be accomplished with Matrox Inspector.