Matrox Electronic Systems II manual Hardware installation

28 Chapter 2: Hardware installation

Back plate of subrack

CompactPCI connector

Screw

Guide

Handle

4.Press the board firmly but carefully into the connector.

5.When the board is in place, the handle opens automatically, exposing a screw. Tighten both this screw, and the one at the top of the bracket.

6.Connect your video sources. For details, see the Connecting external devices section.

7.Turn on your computer.

Under Windows 98, when you boot your computer, Windows’ Plug-and-Play system will detect a new PCI card and you will be asked to assign a driver to it. At this point, you should click on Cancel because the driver will be installed during the installation of MIL or one of its derivatives.