TM-L90/TM-L90 with Peeler Technical Reference Guide
Chapter 5 ESC/POS Command-Related Information
5.1 | TM Printer Operation Performed When Power Supply Switch is Disabled | |
| 5.1.1 Power Supply | |
| 5.1.2 Power Off Control by the Host | |
| 5.1.2.1 When the Power Supply Switch is Enabled | |
| 5.1.2.2 When the Power Supply Switch is Disabled | |
5.2 | Head Divided Control | |
5.3 | Control After Paper Cut | |
5.4 NV Memory | ||
5.5 | Customizing Printer | |
| 5.5.1 Printer initial setting up | |
| 5.5.2 Changing command default values | |
| 5.5.3 Using the NV Memory | |
5.6 Printer Status | ||
| 5.6.1 Hexadecimal Dump Mode |
Chapter 6 Product Specifications
6.1 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5 Paper Feed Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.7 Printing Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.9 Printing Position, Peeling Position, Manual Cutter Position
Appendix A Interface And Connectors
A.1 | ||
| A.1.1 Interface board specifications | |
| A.1.2 Functions of each connector pin | |
| A.1.3 XON/XOFF | |
| A.1.4 Code | |
A.2 | IEEE1284 Parallel Interface | |
| A.2.1 Mode | |
| A.2.2 Interface Signals |
Appendix B Consumable Specifications
B.1