Epson manual TM-L90/TM-L90 with Peeler Technical Reference Guide

TM-L90/TM-L90 with Peeler Technical Reference Guide

MSW8

Bit	Function	Value
		0 (OFF)	1 (ON)
1	Means of recovery from paper layout error	Recovery by pressing FEED	No recovery by pressing
			FEED
2	Paper layout error recovery means	Recovery by pressing FEED	No recovery by pressing
			FEED
3	PAPER OUT LED behavior at paper near-end	On *	Off
	occurrence
4	Select maximum length for automatic	160 mm	300 mm
	measurement of paper
5	Insert left and right margins to barcode	Not inserted *	Inserted
6	Feeding paper to the print starting position	Enabled *	Disabled
	at power on
7	Reserved	Fixed to OFF	--
8	Printer cover open during operation	Automatically recoverable	Recoverable error *
		error	(Recovered by error
			recovery command)

If [Msw8-1] is OFF, the paper is determined automatically if the printer recovers from the paper layout error. Furthermore, the results of automatic paper determination are overwritten if the settings for paper layout are already saved in the NV memory.

If [Msw8-2] is OFF, the paper is determined automatically if the printer recovers from the paper layout error. Furthermore, the results of automatic paper determination are overwritten if the settings for paper layout are already saved in the NV memory.

The [Msw 8-4] setting influences initialization at power-on when “label paper” or “receipt paper with black mark” is specified for the paper layout. Refer to “Setting Paper Layout” on page 2-45for the paper layout.

When [Msw 8-6] is set to "Feeding paper to the print starting position at power on is disabled", the printer does not execute the operation of feeding paper to the print starting position at power on (the printer executes the operation when its cover is opened and closed). Hence, the user should note the following points since the printer operates on the assumption that the paper has already been fed to the print starting position at power on.

a)Turn off the power supply after feeding of paper to the print starting position. b)Do not open the cover while power is off.

c)If you have opened the cover with power off, turn power on, then open and close the cover once before starting printing, and perform the operation of feeding paper to the print starting position.

If the print starting position has not been set at power-on, the printing position of the first sheet may shift, or a paper layout error may occur.

*: Factory setting

Customized values

Item	Value
Selection of user NV memory	1 KB *	64 KB
capacity	128 KB	192 KB
Selection of NV graphics memory	None	64 KB
capacity	128 KB	192 KB
	256 KB	320 KB
	384 KB *

Rev. B Setup 2-39