TM-L90/TM-L90 with Peeler Technical Reference Guide

2.2.2 Instructions for Installation

The TM-L90 can be placed vertically (paper outlet in front), horizontally (paper outlet at the top), or attached to a wall (using the optional wall hanging set WH-10).

With the TM-L90 with peeler, you can use it vertically or wall mounted with either peeling issuing or with continuous issuing (not using the peeler).

Note:

For the TM-L90 with Peeler, horizontal installation is prohibited to avoid jams caused by re-sticking of backing paper and a label.

The illustration below shows the vertical installation for the TM-L90 with Peeler.

Note:

To hang the printer on the wall, see the Wall Hanging Bracket Set Installation Manual provided with the WH-10 for instructions.

It is recommended to take some measures so that the printer will be stable when paper is being loaded or a drawer is being used. The DF-10 (velcro fastening) for fixing the printer is provided as an option.

When using the printer with the peeling issuing mode, be sure to install the printer so that a peeled label will not contact the used backing paper. Re-sticking of a peeled label to the backing paper will cause jams.

Rev. B

Setup 2-3

Page 27
Image 27
Epson L90 manual Instructions for Installation