Specified Original Paper, Print Density Adjustment | Epson L90

Note:

The TM-L90 can use thermal roll paper with width of 38 ~ 70 mm or roll paper with width of 80 mm.

For two-color thermal roll paper, "Notes on Two-Color Paper Handling" on page B-23.

If solid printing or outline character printing on a label is executed, the print quality may be decreased.

B.1.2.3 Specified Original Paper

Use the following original paper types for die-cut label roll paper:

The type number with (*) indicates that it is used for specified die-cut label roll paper.

❏Single-color thermal label paper type no.:

(*)HD-75	Nippon Paper Industries Co., Ltd.
150HA	Richo Co., Ltd.

❏Two-color thermal label paper type no.:

BR21	OJITAC Co., Ltd.

B.1.2.4 Print Density Adjustment

For best print quality and reliability, select the proper print density for the paper type used as described in the table below. If printing is performed with a density that exceeds the density described in the table below, the reliability ("TM-L90" on page 6-5) is not guaranteed. Print density can be set with a software command.

Original paper no.	Original roll paper no.	Density level

NTL series	HD75	130%

--	150HA	120%

B.1.2.5 Paper to Use for High Speed

If any of the following original paper types of thermal paper are used, the memory switch for the customized value setting can be used to set the maximum print speed up to 150 mm/s {5.91"/s} (level 9):

❏HD-75, 150HA

B-6Consumable Specifications

Rev. B

Image 140

Epson L90 manual Specified Original Paper, Print Density Adjustment

Contents

TM-L90/TM-L90 Peeler Technical Reference Guide Page Revision Table TM-L90/TM-L90 with Peeler Technical Reference Guide For Safety Key to Symbols Iii Modular Connector Manual Content About This ManualAim of the Manual Related Documentation Rev. B Contents Connecting to the Host Computer and Options Application Development Information ESC/POS Command-Related Information Product SpecificationsAppendix a Interface And Connectors Appendix B Consumable Specifications Appendix C Character Code Table Appendix D Option Specifications Appendix E MaintenanceAppendix F Troubleshooting Appendix G Shipping ProceduresPage Accessories Product OverviewProduct Structure Models Option 2Product Overview Rev. B Printer Part Names Name and Description of Each PartPart Names TM-L90 4Product Overview Rev. B Part names TM-L90 peeler specificationPart Names of TM-L90 Peeler Specification Feed button with TM-L90 Feed button with the TM-L90 peeler specificationControl Panel 6Product Overview Rev. B Paper OUT LED with TM-L90 Power SwitchPaper OUT LED with the TM-L90 peeler specification 8Product Overview Rev. B Power switch coverMode switch TM-L90 peeler specification only Mode switch 10Product Overview Rev. B ConnectorsConnector Panel Setup Setup Flow 2Setup Rev. B Installation ProceduresPrecaution For Installation Instructions for Installation 4Setup Rev. B Paper exit guide Adjusting Roll Paper Near-End Detection Position 6Setup Rev. BWith TM-L90 Part names and the locations of N.E. detector components Rev. B Setup Detector Holder 8Setup Rev. BAdjustment Positions of N.E. Detector Load the roll paper Close the roll paper cover With the TM-L90 peeler specification Setup Rev. B Adjust the sensor so that it projects from the window Near end sensor adjustment position Near end sensor holder Set the roll paper Close the roll paper cover Connecting Power Supply Unit PS-180 Attaching Power Supply Unit Power Supply Connector Autocutter settings TM-L90 only Lift the top of the cutter unit upward and remove it Setup Rev. B Setting Roll Paper Width Notch Front edge Shaft Protrusion DIP Switch Settings DIP switch settings Serial interface model OFF Setting Memory Switches DIP switch settings Parallel, USB, Ethernet model Items that can be set in the memory switch setting mode Starting the Memory Switch Setting mode Location of the Feed button inside the roll paper cover Ending Memory Switch Setting mode Operating procedure of Memory Switch Settings Entering Memory Switch Settings Mode Selecting individual settings Selection of Print density Rev. B Setup Setup Rev. B Rev. B Setup Or more times No change With the TM-L90 peeler specification Setting Various Items via Utilities How to Set Various Items with ESC/POS Commands Memory Switch Functions TM-L90 memory switch settings MSW8 Customized values Serial Communication condition TM-L90 peeler specification memory switch settings MSW7 TM-L90/TM-L90 with Peeler Technical Reference Guide Serial Communication condition Paper Loading Method Paper setting with peeling issuing Rev. B Setup Setup Rev. B Setting Paper Layout Automatic paper layout setting Rev. B Setup +1.5 mm Parameters Calculated for Automatic Layout Setting Clearing Paper Layout Setting TM Setup Items Summary Feed With TM-L90 Operating Mode Panel Switch OperationSelf Test Mode With the TM-L90 peeler specification Connecting to the Host Computer and Options Connecting to the Host Computer and OptionsConnecting the Cable Connecting to the Host Computer With the RS-232C interface Direct Connection Stand alone Pass-through Connections Hexagon Bolts Threaded in Inches and Millimeters Connection procedureTightening Screws With the parallel IEEE1284 interface With the USB interface 6Connecting to the Host Computer and Options Attaching Locking Wire Saddle With the Ethernet interface IEEE802.3 TM-L90 only Names of parts Name of Parts Connecting to the Drawer 10Connecting to the Host Computer and Options Application Development Information Introduction of Control MethodsWindows Driver Epson Advanced Printer Driver Epson Advanced Printer Driver Overview Epson Advanced Printer Driver Contents 2Application Development Information Rev. B Epson Advanced Printer Driver Support Environment Supported interfacesSupported OSs with confirmation of system operation Supported development languages 4Application Development Information Rev. B Driver Information and Download Destination Epson Opos ADK Contents Epson Opos ADK Opos Control Overview 6Application Development Information Rev. B Epson Opos ADK Support Environment 3 ESC/POS Commands TM Printer Memory Switch Setup UtilityVarious Utilities Electronic Logo Registration Utility for Nvram 8Application Development Information Rev. B SensorsPrinter Cover Sensor Selecting conditions that invoke a Busy State OfflineBusy state Label peeling sensor peeler specification only 10Application Development Information Rev. BReceive buffer Printer Busy conditions and the Msw1-3 status Setting of Paper Width Print DensityPrint Speed Paper to use for high speed 12Application Development Information Rev. B Barcode PrintingCode 128 Barcode Printable characters for code set a 14Application Development Information Rev. B Printable characters for code set B Printable characters for code set C Precautions for Two-Dimensional Code Printing Two-Color PrintingNV Memory 16Application Development Information Rev. B FAQ List Confirmation procedureCorrective procedure Print data dropout occurs Check the handshake process 18Application Development Information Rev. B Rev. B Application Development Information 20Application Development Information Rev. B Power Off Control by the Host ESC/POS Command-Related InformationPower Supply Switch-Related User Operation List When the Power Supply Switch is Enabled When the Power Supply Switch is DisabledHead Divided Control Control After Paper Cut Printer initial setting up Changing command default valuesUsing the NV Memory Customizing Printer Hexadecimal Dump Mode Printer Status TM-L90 Product SpecificationsProduct Specifications 2Product Specifications Rev. B TM-L90 peeler specification Print Specifications 4Product Specifications Rev. B Reliability Mtbf 6Product Specifications Rev. B TM-L90 peeler specification Character Specifications 8Product Specifications Rev. BCharacter Specifications Character Configurations and Dimensions Paper Feed Specifications Paper SpecificationsPrecautions for Printing and Paper Feed Paper feed 10Product Specifications Rev. B Printing AreaThermal Paper Printable Area For Thermal Paper Label Printable Area for Label Printing Position in Relation to Cutter Position 12Product Specifications Rev. BPrinting Position in Relation to Cutter Position TM-L90 23.5mm External Appearance TM-L90 Overview of External Dimensions14Product Specifications Rev. B External Appearance TM-L90 Peeler Specification Operating specifications 16Product Specifications Rev. B RS-232 Serial Interface Interface And ConnectorsInterface board specifications RS-232 standard Functions of each connector pin RTS 3 XON/XOFF Code IEEE1284 Parallel Interface Mode Interface Signals Connector Pin Assignment 6Interface And Connectors Receipt Roll Paper Consumable SpecificationsTM-L90 Roll Paper Specified Receipt Roll Paper Specified Original Roll Paper Print Density Adjustment Paper to Use for High Speed Requirements for Black Mark Position for Receipt Paper Black Mark Interval Requirement Die-Cut Label Paper Specified Die-Cut Label Roll Paper SpecificationsDie-Cut Label Roll Paper Specified Original Paper Consumable Specifications B-7 Requirements for Die-Cut Label Size Label Size Requirement Requirements for Transparency Rate of Die-Cut Label Paper Requirements for Black Mark Position 10Consumable Specifications Specified Continuous Label Roll Paper Continuous Label Roll PaperContinuous Label Paper Requirements for Size of Continuous Label Paper TM-L90 with Peeler Roll Paper 14Consumable Specifications Consumable Specifications B-15 16Consumable Specifications If paper other than the specified original paper is used 18Consumable Specifications Consumable Specifications B-19 20Consumable Specifications Consumable Specifications B-21 22Consumable Specifications Consumable Specifications B-23 24Consumable Specifications Character Code Table 0 PC437 USA, Standard Europe 1 Katakana 2 PC850 Multilingual 3 PC860 Portuguese 4 PC863 Canadian-French 5 PC865 Nordic 16 WPC1252 17 PC866 Cyrillic #2 18 PC852 Latin2 19 PC858 Euro 255 Blank International Character Set Country Option Specifications Electrical CharacteristicsCase Specifications Case specifications AC Cable Selection Material Adhesive adheres on cutter blade MaintenanceCleaning the autocutter TM-L90 only Adhesive being removed with flat-blade screwdriver Print Head Cleaning 4Maintenance Cleaning the peeler TM-L90 peeler specification only 6Maintenance Troubleshooting Panel LED and Error StatusPower Power LED Power Power LED No Roll Paper Paper OUT LED Error Error LEDError Error LED Automatically recoverable errors Error codeAutomatically recoverable errors Recoverable errors Recoverable Errors Troubleshooting F-5 Unrecoverable errors Unrecoverable Errors Troubleshooting F-7 8Troubleshooting When a paper jam occurs TM-L90 peeler specification 10Troubleshooting Shipping Procedures 2Shipping Procedures Page Seiko Epson Corporation