3Mt | 3M Library Security System |
5.2Print Media Protection —
3Mt Tattle-Tapet Security Strips: B2
Description/Characteristics
The 3Mt B2 Security Strips are designed to be placed between the pages of books or magazines.
Security strips on protected items must be properly desensitized so the items can be carried through the detection system without causing an alarm.
Security Strip Application
The 3M B2 security strips should be applied and stored away from areas which are readily accessible to patrons.
Security strips should be applied only to surfaces which are flat, clean, dry and at room temperature. For maximum adhesion, minimize touching the adhesive surface of the security strips.
Installation in Books
1.Open the book to a page with a margin wide enough that the security strip will not cover the printing.
Avoid pages where the book opens naturally.
Do not open the book wide enough that it will open to this page again.
2. Remove the short liner from the security strip.
E 3M 1999 September |