3Mt | 3M Library Security System |
5.1Print Media Protection —
3Mt Tattle-Tapet Security Strips: B1
Description/Characteristics
The 3Mt B1 Security Strip is a security strip which may be secured inside the spine of a book.
Security strips on protected items must be properly desensitized so the items can be carried through the detection system without causing an alarm.
Security Strip Application
The 3M B1 security strips should be applied and stored away from areas which are readily accessible to patrons.
Security strips should be applied only to surfaces which are flat, clean, dry and at room temperature. For maximum adhesion, minimize touching the adhesive surface of the security strips.
Installation in Books
1. Remove the liner from the security strip.
2.Place 1/4 inch [6 mm] of the B1 security strip on the tip of the bayonet.
3.Open the book so the book cover separates from the binding.
E 3M 1999 September |