White Rodgers 1F95-80 manual Total Keypad Lockout on

Page 17

5 minutes between cooling cycles. The following may cause a time delay in COOL:

a) Return of power after a power outage.

b) Pressing	SYSTEM	to change operating
b) Pressing	SWITCH	to change operating
modes.

c)Pressing or , creating a call for COOL too soon after a previous call.

•SYSTEM INDICATOR LIGHTS — The red indicator light comes on whenever the heat- ing or cooling system is operating. The yellow indicator light comes on when the second stage of heating or cooling is oper- ating.

•TOTAL KEYPAD LOCKOUT — When option switch #4 is in the total keypad lockout position (ON), programs cannot be altered and all buttons are disabled.

NOTE

Programming should be completed and bat- tery should be installed before changing option switch #4.

TOTAL KEYPAD LOCKOUT (ON)

ON

1 2 3 4

Switch #1 set at installation (DO NOT CHANGE) Switch #2 set at installation (DO NOT CHANGE) Switch #3 (see EMR)

Switch #4 ON

Switches #1 and #2 are set at installation and should not be changed. To enable total keypad lockout, move option switch #4 to ON. To disable total keypad lockout, move

option switch #4 to OFF.

17

Image 17

Contents 1F95-80 About Your New Thermostat Your NEW Thermostats Questions and AnswersOperating Your Thermostat Programming YourYour NEW THERMOSTAT’S Features To turn thermostat to OFF UseBack of The Thermostat Body Parts of the ThermostatBack of Thermostat Body Display Seven DAY Digital COMFORT-SET System Thermostat Buttons 11 12 Operating Features Mostat back on the wall. Press EMR onStat to revert to the mode heat or cool in which TWO Hour Temperature OverING Cycle Times Anticipation If Adjustable Heating and CoolConvertibility Press Timefwd SET Total Keypad Lockout on Until FAN Auto Planning for Your NeedsFactory Preprogramming Heating Program Cooling Program Heating/Cooling Schedule PlanSample Set Current Time and Day Entering Your ProgramProgram Heating and Cooling Temperatures Enter Heating Program Until PRG FAN is displayed Gram operation Enter Cooling Program Begin program operation Twice Using The Copy ButtonCheck Your Programming HEAT, COOL, Auto Ming Your Thermostat How can I permanently change a part of my program?Gramming Your Thermostat Why can’t I program the thermostat in the Auto mode?ING Your Thermostat Page Erating Your Thermostat Display is flashing BATTERY. What does this mean?If the outside temperature is below 50F Programming Your THERMO- Stat Why is the system turning on and off so frequently seldom?Ating Your Thermostat Until HEAT, Cool Ming, press Page Part No -5210A