Using The COPY Button
You can copy the entire heating/cooling pro- gram into any or all other days’ programs. However, you must perform each copy function separately. Each time you begin a COPY op- eration, you must start with the day’s program you wish to copy FROM. A COPY operation is
HOLD
not complete until COPY has been pressed
TWICE.
NOTE
For most efficient programming, you should enter both the heating and cooling programs for the day you wish to copy FROM before using the COPY function, since the COPY function copies the entire day’s heating and cooling programs to other days.
1.Press PRGMVIEW .
2. Press ADVDAY until the day you want to copy FROM is displayed. If you have not com- pleted programming for this day, do so before proceeding.
3. Press COPYHOLD once. COPY will appear on the display. A number from 1 to 7 will also appear, representing the day you have selected to copy (Monday is 1, Tuesday is 2, Wednesday is 3, etc.). For example, if in step 2 you displayed Wednesday’s pro-
gram, when you press COPYHOLD , COPY 3 will appear in the display (as shown below).
EXAMPLE:
29