White Rodgers 1F95-80 manual Enter Cooling Program

Page 27

Enter Cooling Program

!CAUTION

If outside temperature is below 50°F, we recommend that you remove the thermo- stat from the wall before proceeding with the following steps to program cooling temperatures. Personal injury or property damage may occur due to air conditioner compressor slugging. A fresh 9 volt Energizer® alkaline battery must be installed to perform off-wall programming. Programming away from the wall should prevent accidental com- pressor operation. BE SURE SYSTEM SWITCH IS SET TO OFF POSITION BE- FORE REATTACHING THE THERMO- STAT TO THE SUBBASE!

1. Press	SYSTEM	until COOL is displayed.
	SWITCH

2.Press PRGMVIEW once. MO, the abbreviation for

Monday, and the letter O, representing the occupied cooling period, will appear in the display. Also displayed are the currently programmed start time for the occupied cooling period and the currently pro- grammed COOL O temperature.

3.To change the displayed start time to your selected start time for Monday’s occupied

cooling period, press TIMEFWD or BACKTIME until

your selected time appears. The time will change in 15 minute increments.

4.If the temperature displayed is not the COOL O temperature you want for Monday’s occupied cooling period, press or (if you continue to press

27

Image 27

Contents 1F95-80 About Your New Thermostat Programming Your Questions and AnswersYour NEW Thermostats Operating Your ThermostatYour NEW THERMOSTAT’S Features To turn thermostat to OFF UseBack of The Thermostat Body Parts of the ThermostatBack of Thermostat Body Display Seven DAY Digital COMFORT-SET System Thermostat Buttons 11 12 Operating Features Mostat back on the wall. Press EMR onStat to revert to the mode heat or cool in which TWO Hour Temperature OverAdjustable Heating and Cool Convertibility Press TimefwdING Cycle Times Anticipation If SET Total Keypad Lockout on Until FAN Auto Planning for Your NeedsFactory Preprogramming Heating Program Cooling Program Heating/Cooling Schedule PlanSample Set Current Time and Day Entering Your ProgramProgram Heating and Cooling Temperatures Enter Heating Program Until PRG FAN is displayed Gram operation Enter Cooling Program Begin program operation Twice Using The Copy ButtonCheck Your Programming HEAT, COOL, Auto Ming Your Thermostat How can I permanently change a part of my program?Why can’t I program the thermostat in the Auto mode? ING Your ThermostatGramming Your Thermostat Page Display is flashing BATTERY. What does this mean? If the outside temperature is below 50FErating Your Thermostat Why is the system turning on and off so frequently seldom? Ating Your ThermostatProgramming Your THERMO- Stat Until HEAT, Cool Ming, press Page Part No -5210A