SET
5. Press CLOCK once. The display will show
the day of the week as an abbreviation (MO for Monday, TU for Tuesday, etc.).
6. Press and hold either TIMEFWD or BACKTIME until you
reach the correct day of the week.
7. Press PRGMRUN once. The display will show the correct time and room temperature alter- nately.
Program Heating and Cooling
Temperatures
During programming, if you don’t press any buttons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant temperature. The display will revert to the alter- nating time/temperature display. To resume
programming after this happens, press PRGMVIEW
until you are at the point where you stopped programming. Then you may continue to enter your programs normally. If you want to stop
programming at any time, simply press PRGMRUN to resume program operation.
1. | Press | SYSTEM | until HEAT is displayed. |
SWITCH | |||
2. | Press | TEMPVIEW once. The display will continue | |
to show HEAT. Beside HEAT is the letter O, representing the occupied heating tem- perature (HEAT O). At the right of the display is the currently programmed HEAT
O setting.
3.Press either 
or 
to change the temperature to your selected HEAT O set- ting.
23