White Rodgers 1F95-80 TWO Hour Temperature Over, Stat to revert to the mode heat or cool in which

Page 14

setpoint display is blank in the AUTO mode). The system will now automatically switch between heating and cooling depending on the actual room temperature.

NOTE

If the thermostat is configured for automatic changeover, the thermostat will not allow the temperature separation between the highest heat setting and the lowest cool setting to be less that 1°F. For example, if the highest heat setting is 76°F, the lowest cool setting cannot be below 77°F (see diagram below).

•TWO HOUR TEMPERATURE OVER-

RIDE — Press or until the display shows the temperature you want. The thermostat will override current pro- gramming and keep the room temperature at the selected temperature for two hours. After two hours, the thermostat will auto- matically revert to the program.

NOTE

This feature will not work in the AUTO mode. Therefore, we do not recommend using the temperature override feature when the thermo-

79

78

COOLING TEMPERATURES

stat is in the AUTO mode. Pressing or in the AUTO mode will cause the thermo-

77

76

DEAD BAND 1°F

stat to revert to the mode (heat or cool) in which

75

74 HEATING TEMPERATURES

73

it was last cycled before switching to the AUTO mode and will prevent automatic switching for

14

Image 14

Contents 1F95-80 About Your New Thermostat Operating Your Thermostat Questions and AnswersYour NEW Thermostats Programming YourYour NEW THERMOSTAT’S Features Use To turn thermostat to OFFParts of the Thermostat Back of The Thermostat BodyBack of Thermostat Body Display Seven DAY Digital COMFORT-SET System Thermostat Buttons 11 12 Operating Features EMR on Mostat back on the wall. PressTWO Hour Temperature Over Stat to revert to the mode heat or cool in whichING Cycle Times Anticipation If Adjustable Heating and CoolConvertibility Press Timefwd SET Total Keypad Lockout on Planning for Your Needs Until FAN AutoFactory Preprogramming Heating/Cooling Schedule Plan Heating Program Cooling ProgramSample Entering Your Program Set Current Time and DayProgram Heating and Cooling Temperatures Enter Heating Program Until PRG FAN is displayed Gram operation Enter Cooling Program Begin program operation Using The Copy Button TwiceCheck Your Programming HEAT, COOL, Auto How can I permanently change a part of my program? Ming Your ThermostatGramming Your Thermostat Why can’t I program the thermostat in the Auto mode?ING Your Thermostat Page Erating Your Thermostat Display is flashing BATTERY. What does this mean?If the outside temperature is below 50F Programming Your THERMO- Stat Why is the system turning on and off so frequently seldom?Ating Your Thermostat Until HEAT, Cool Ming, press Page Part No -5210A