Desa EFP33NRB installation manual Product Identification, Fireplace Floor Assembly

Page 4

SAFETY INFORMATION

Continued

1.This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

2.Do not place propane/LP supply tank(s) in- side any structure. Locate propane/LP supply tank(s) outdoors (propane/LP units only).

3.If you smell gas

•shut off gas supply

•do not try to light any appliance

•do not touch any electrical switch; do not use any phone in your building

•immediately call your gas supplier from a neighborʼs phone. Follow the gas supplierʼs instructions

•if you cannot reach your gas supplier, call the fire department

4.This fireplace shall not be installed in a bed- room or bathroom.

5.Do not use this fireplace as a wood-burning fireplace. Use only the logs provided with the fireplace.

6.Do not add extra logs or ornaments such as pine cones, vermiculite or rock wool. Using these added items can cause sooting. Do not add lava rock around base. Rock and debris could fall into the control area of fireplace.

7.To prevent the creation of soot, follow the instruc- tions in Cleaning and Maintenance, page 29.

8.Before using furniture polish, wax, carpet cleaner or similar products, turn heater off. If heated, the vapors from these products may create a white powder residue within burner box or on adjacent walls or furniture.

9.This fireplace needs fresh air ventilation to run properly. This fireplace has an Oxygen Deple- tion Sensing (ODS) safety shutoff system. The ODS shuts down the fireplace if not enough fresh air is available. See Air for Combustion and Ventilation, page 6. If fireplace keeps shutting off, see Troubleshooting, page 30.

10.Do not run fireplace

•where flammable liquids or vapors are used or stored

•under dusty conditions

11.Do not use this fireplace to cook food or burn paper or other objects.

12.Do not use fireplace if any part has been exposed to or under water. Immediately call a qualified service technician to inspect the fireplace and to replace any part of the control system and any gas control which has been under water.

13.Do not operate fireplace if any log is broken. Do not operate fireplace if a log is chipped (dime-sized or larger).

14.Turn fireplace off and let cool before servicing. Only a qualified service person should service and repair fireplace.

15.Operating fireplace above elevations of 4,500 feet could cause pilot outage.

16.To prevent performance problems with pro- pane/LP units, do not use propane/LP fuel tanks of less than 100 lb. capacity.

17.Provide adequate clearances around air openings.

PRODUCT

IDENTIFICATION

Log Set

Manual

 

 

Override

 

 

Handle

 

 

Remote

Piezo

 

Ignitor

 

Control

 

 

 

 

Wall Switch

Manual Ignition

 

Assembly

 

Bypass Switch

 

 

Figure 1 - Fireplace Floor Assembly

Top Louver Assembly

Top Outer

 

Firebox

Casing

 

Hood

 

Firebox

 

Support

 

Screen

Assembly

Bottom Louver

Blower Assembly

Assembly

(Optional)

 

Figure 2 - Fireplace

4

www.desatech.com

111245-01B

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Shown with optional Hearth base accessory CGEFP33PRB, CGEFP33NRB EFP33PRB, EFP33NRBTable of Contents Safety Information Fireplace Floor Assembly Product IdentificationLocal Codes Product FeaturesUnpacking Providing Adequate Ventilation AIR for Combustion VentilationDetermining FRESH-AIR Flow for Fireplace Location Ventilation AIR Ventilation Air From Inside BuildingCheck GAS Type InstallationVentilation Air From Outdoors Installation Clearances Installation SequenceRemoving Fireplace Screen and Floor Assembly Electrical HookupRelocating Wall Switch Assembly Electrical Connections for Power CordFor Mantel Installation For Recessed Installation For Recessed FireplaceMounting Wall Switch Assembly to Side of Mantel Cutting LinesInstalling Variable Speed Blower Accessory Mounting Blower to FireboxLocation of Wiring Diagram Decal 3 from Blower Installing Thermostatic Blower Accessory Installing Switch and Cover Assembly and Speed ControlInstalling Bushings Installation Items Needed Installing GAS Piping to Fireplace LocationOperating the Blower Natural Connecting Fireplace to GAS SupplyPropane/LP Test Pressures In Excess Of 1/2 Psig 3.5 kPa Checking GAS ConnectionsTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Conventional Fireplace Installation Pressure Testing Fireplace GAS ConnectionsBUILT-IN Fireplace Installation Nailing FlangesRough Opening for Installing Wall Installing Hood Top Brass Trim Side Brass Trim Adjusting Set ScrewsInstalling Logs Installing Back Log #1 Cgefp Logs ShownInstalling Battery Into Remote Installing ScreenFor Your Safety Read Before Lighting Operating FireplaceNormal Lighting Instructions Using Supplied Wall Switch AssemblyControl Shutting Off Heater Wireless Remote Control Manual Lighting Instructions for Electrical Power OutageTo Turn OFF GAS To Appliance Inspecting Burners Optional Blower OperationPilot Flame Pattern Main BurnerCleaning Maintenance Burner Injector HolderPilot AIR Inlet Hole LogsTroubleshooting Observed Problem Possible Cause RemedySee Cleaning and Mainte Gas leak. See Warning Statement aboveSpecifications Service HintsTechnical Service When Gas Pressure Is Too LowIllustrated Parts Breakdown Parts List Remote Control LOG Base AssemblyIllustrated Parts Breakdown KEY Part Number EFP33PRB EFP33NRB Description QTY Firebox Models CGEFP33PRB, CGEFP33NRB, EFP33PRB and EFP33NRB KEY Part Number Description QTY Replacement Parts AccessoriesCorner Hearth Base for USE with Corner Mantel Corner Mantel Accessory with Fireplace Perimeter TrimHearth Base for USE with Cabinet Mantel Wiring Diagram Templates This page Intentionally Left Blank Parts Central 111245-01B 111245-01B Not a UPC

EFP33NRB, CGEFP33PRB, CGEFP33NRB, EFP33PRB, EFP33NRB specifications

Desa offers a range of premium electric fireplaces with models such as EFP33NRB, CGEFP33PRB, CGEFP33NRB, EFP33PRB, and EFP33NRB, each designed to blend aesthetics with advanced heating technology. These electric fireplaces are renowned for their ability to create a warm ambiance without the hassle of traditional wood or gas fireplaces.

The EFP33NRB model, a part of Desa's electric fireplace collection, features a sleek design that fits seamlessly into various interior styles. With its realistic flame effect and adjustable brightness settings, users can customize their experience, enhancing any room while maintaining a cozy atmosphere. This model also incorporates energy-efficient LED technology, ensuring minimal power consumption without compromising on the visual appeal and comfort.

Similarly, the CGEFP33PRB and CGEFP33NRB are designed for those who appreciate the combination of style and functionality. These models offer a robust heating output, capable of warming larger spaces efficiently. The innovative heat management system also ensures even heat distribution, making these units suitable for year-round use. Additionally, remote control capabilities allow for effortless adjustment, enhancing user convenience.

The EFP33PRB features a modern framework that showcases the flames within a stylish casing. Its user-friendly interface includes touch controls and an easy-to-read display, allowing users to change settings with ease. The fireplace boasts a range of flame colors, allowing for personalization to match any decor or mood.

Across all these models, safety remains a top priority with built-in overheat protection and a tip-over switch, providing peace of mind during operation. Furthermore, the fireplaces operate quietly, ensuring an undisturbed environment while creating a warm, inviting space.

In conclusion, the Desa EFP33NRB, CGEFP33PRB, CGEFP33NRB, EFP33PRB, and EFP33NRB models represent the pinnacle of electric fireplace technology. With their modern designs, efficiency, and flexibility, they offer a perfect solution for anyone looking to enhance their living spaces with warmth and style. Whether for a contemporary home or a cozy cabin, these fireplaces promise to deliver both comfort and elegance.
Top Page Image Contents