Desa CD36TN-M Continued, Removing Lower Louver Access Panel, Removing Top Louver Trim Panel

Page 26

Removing Lower Louver Access Panel

Fireplace

Installation

Continued

WARNING: If fireplace has been running, turn off and un- plug fireplace. Let cool before re- moving glass door or louvers.

Removing Lower Louver Access Panel

1.Grasp the lower louver panel and pull up until the hanger brackets release from the door pins (see Figure 43).

2.Swing the louver panel out until it clears the fireplace opening.

3.Pull the entire panel out until the bottom tabs are free of the slot openings in the lower face frame.

Door Pin

Lower Louver
Access Panel	Hanger Bracket

Figure 43 - Removing Lower Louver

Access Panel

Removing Top Louver Trim Panel

1. Grasp the two hanger brackets at the bottom and pull up until the hanger brackets release from the door pins (see Figure 44).

2. Swing out the bracket ends until the upper panel tabs can be angled out of the slot open- ings in the upper face frame.

3. Pull the entire louver trim panel out of the face frame.

WARNING: If fireplace has been running, turn off and let cool before accessing or servic- ing the unit.

WARNING: Handle glass door panelwithcare.Donot strike,slam, or otherwise abuse glass. Do not operate fireplace with glass door removed, cracked, or broken.

Panel Tabs

Top Louver

Trim Panel

Hanger

Bracket

Door Pin

Figure 44 - Removing Top Louver Trim

Panel

Removing Glass Door

If replacement of glass is necessary, the entire assembly, glass and frame, must be replaced. If glass is broken, wear gloves and tape the remaining fragments onto the frame.

1.Remove the lower louver panel (see Removing Lower Louver Access Panel and Figure 43).

2.Remove the top louver trim panel (see Remov- ing Top Louver Trim Panel and Figure 44).

3.Hold the glass frame with one hand and with the other hand unlock the two door latches found on top of the firebox to release tension on the door frame (see Figure 45, page 27).

4.Unhook the locking clasp from the tabs on the door frame and with both hands swing the door panel out while pivoting the lower frame on the lower retaining bracket.

5.Lift the lower frame tabs out from the position- ing slots found on the lower frame retaining bracket (see Figure 45, page 27).

6.Remount the new frame in reverse order by

26

www.desatech.com

118531-01A

Image 26

Contents WHAT TO DO IF YOU SMELL GAS Table of Contents Safety Information Continued Safety informationProduct Identification Local Codes Product FeaturesPre-Installation Preparation Location and space requirementsPackaging and Removal Figure 3 - Fireplace Bottom DimensionsContinued ClearancesContinued InstallationFigure 6 - Unit Dimensions Figure 5 - Framing Clearances for CornerContinued MANTEL CLEARANCESInside Corner D E B LFigure 9 - Minimum Clearances for Termination Cap Outside CornerVenting Installation Instructions Continued Venting Installation instructionsINSTALLATION PLANNING Figure 10 - Vent Pipe ConnectionsInner Wall Firestop Figure 12 - Installing Siding StandoffFigure 13 - Installing Outer Wall Firestop Standoff Vent Cap Apply Mastic to All Four SidesConfiguration with Vertical Rise and One 90 Elbow Configuration For Corner InstallationUsing One 90 Elbow Clearance at Ground Floor InstallationHORIZONTAL VENT INSTALLATIONS ContinuedFigure 20 - Installing Firestop Installation for vertical terminationFlat Ceiling Installation ContinuedFigure 21 - Installing Thimble with Firestop Thimble InstallationVertical Termination Configurations for Top Vent ContinuedContinued parts list for venting kits and componentsConfiguration Using Two 90 Elbows Figure 23 - Vertical VentingNumber ContinuedELECTRICAL SUPPLY CONNECTION DescriptionFigure 28 - Attaching Speed Control to Installing optional blower accessoriesFigure 27 - Blower Model BK Firebox Millivolt ModelsFigure 30 - Blower Model BKT Model BKT InstallationContinued Figure 32 - Millivolt Ignition Wiring Diagram Wiring DiagramsFigure 31 - Blower Wiring Diagram for ContinuedInstalling Remote Receiver Installing optional wall Mount Switch - gwmS2Figure 33 - Connecting Wall Switch to Figure 34 - Attaching Alkaline Battery toContinued Installing Gas Piping to Fireplace LocationInstallation Items Needed Check Gas TypeFigure 39 - Connecting Flexible Gas Line CONNECTING FIREPLACE TO GAS SUPPLYInstallation Items Needed Pressure Testing Gas Supply Piping SystemFigure 42 - Checking Gas Joints for Removing/Replacing Glass DoorFigure 40 - Equipment Shutoff Valve Natural Gas FireplaceContinued Removing Lower Louver Access PanelFigure 43 - Removing Lower Louver Access Panel Removing Top Louver Trim PanelContinued Installing LOGS, lava rock and glowing embersFigure 46 - Installing Logs Figure 45 - Removing/Replacing Glass Doorlighting instructions for your safety Read before lightingOperating Fireplace TO TURN OFF GAS TO APPLIANCEContinued MANUAL LIGHTING PROCEDUREFigure 49 - Setting the Selector Switch optional Hand-Held REMOTE OPERATIONAuto Shutoff Feature operating optional blower accessorySafety Features Remote Control Unit HRC200Figure 52 - Pilot Assembly Millivolt pilot assemblysee Troubleshooting, page see Troubleshooting, pageContinued Figure 54 - Removing Logs and Burner AssemblyFigure 56 - Adjusting Air Shutter Pilot Orifice ConversionGas Control Conversion Cleaning and MaintenanceConversion Instructions GLASS DOORpilot and burners CAUTION: Do not vacuum if pieces are hotContinued logsPOSSIBLE CAUSE TroubleshootingOBSERVED PROBLEM REMEDYContinued TROUBLESHOOTINGOBSERVED PROBLEM POSSIBLE CAUSEWARNING If you smell gas Shut off gas supply Parts Not Under Warranty OBSERVED PROBLEMParts Under Warranty ContinuedMANUAL BLOWER KIT - BK WALL MOUNTED ON/OFF SWITCH GWMS2 Not ShownWhen Gas Pressure Is Too Low THERMOSTATICALLY - CONTROLLED BLOWER KIT - BKTFireplace Assembly for Model CD36TN-M Illustrated Parts BreakdownPARTS LIST FIREPLACE ASSEMBLY FOR MODEL CD36TN-MBURNER ASSEMBLY FOR MODEL CD36TN-M Illustrated parts breakdownBURNER ASSEMBLY FOR MODEL CD36TN-M 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16LIMITED WARRANTY DIRECT-VENTFIREPLACE Warranty InformationKEEP THIS WARRANTY