Desa MSBVBN, MSBVBP installation manual Freestanding Fireplace Assembly, Stove Body Assembly

OWNER’S MANUAL

PRE-INSTALLATION PREPARATION

Continued

4" 4"

Figure 4 - Clearance for Corner Installation

26"

Front

FREESTANDING FIREPLACE ASSEMBLY

STOVE BODY ASSEMBLY

1.Lift off corrugated box enclosing stove body crating.

2.Remove all screws fastening the wood frame enclosure. Spread wood frame open and lift away from plastic-bagged stove body. The bottom pieces of pallet wood will remain bolted to the stove body.

3.Remove plastic bag from stove body.

4.Remove back panel from stove and dis- card (see Figure 6). Use an adjustable wrench or a 10 mm socket. Remove six

(6) bolts and washers. Keep bolts and washers to attach brackets when install- ing fireplace insert into stove body. Dispose of back panel.

5.Remove all contents from inside stove cavity. Contents include:

7.Remove remaining pallet wood at- tached to bottom of stove body (see Figure 8). Use an adjustable wrench to remove bolts.

8.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 9 and Figure 10, page 6). Use an adjustable wrench or a 12mm socket.

9.Fasten stove bottom to stove with four

(4) M6 x 1 - 25mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figure 9 and Figure 11, page 6). Use an adjustable wrench or a 10mm socket.

Bolt Front Pallet Wood

25"

Figure 5 - Freestanding Fireplace Bottom Dimensions

(1) - Stove bottom

(4)- Legs with leg leveler bolts

(1)- Bottom door

(1)- Top grate

(1)- Hardware kit bag with fasteners

6.Carefully lay stove body on back to at- tach bottom components to stove body (see Figure 7). Rest stove on drop cloth or blanket to avoid scratching stove edges.

Bolt	Product
Back	Identification
	Label
Stove
Panel

Figure 6 - Removing Back Panel

Top of Stove Unit

Front of
Stove
Unit	Pallet
Drop
	Wood
Cloth/	Bolted to
Blanket	Bottom of
	Stove
	Body

Pallet Wood		Bottom Of
		Stove Unit
Figure 8 - Removing Pallet Wood From
The Bottom of The Stove
Door Hinge	Door Catch Bolt With
Step Bolt Hole	Adjustable Hex Nuts Hole
Leg	Front	Leg
Hole		Hole

Stove

Bottom

Hole

Leg Hole

Bottom Of Stove Unit

Figure 9 - Locating Threaded Holes for Stove Bottom, Legs, and Door Attachment

Front of Stove Unit

Stove

Unit

Figure 7 - Laying Down Stove On Side Continued

106022 5