OPERATING INSTRUCTIONS
GENERAL GLASS INFORMATION
Only glass approved for use in with this product may be used for replacement.
1.The use of substitute glass will void all product warranties.
2.Care must be taken to avoid breakage of the glass.
Under no circumstances should this fireplace be operated without the front glass or with a broken glass. Replacement of the glass (with gasket) as supplied by the manufacturer should be done by a licenced qualified service person.
LOUVRE REMOVAL
D232
To remove louvres first remove the two (2) screws (Fig. 31) fastening the louvre assembly to the fireplace. Lift the louvre assembly straight out sliding the back guides out of the fireplace body. (To reinstall, reverse).
Front View
Screws | Fig. 31 |
TRIM REMOVAL
D232
1.Remove the two (2) outer 3/8" nuts holding the frame window brass trim in place. (Fig. 32)
2.Remove the frame window brass trim by moving it straight forward.
GLASS REMOVAL
D232
1 . Remove frame window brass trim (See Trim Removal section)
2.Remove remaining bottom 3/8" nut at the bottom of the frame window.
3.Remove 3/8" nut from each side of the frame window (Fig. 32).
4.Remove frame window by pulling it forward and up.
| GLASS |
| FRAME |
OUTER NUTS | DRAWING 2 |
| |
DRAWING 1 |
|
Side Nuts |
|
BOTTOM NUT | Fig. 32 |
- 18 -