OPERATING INSTRUCTIONS
ARRANGING THE COALS
Safety Notice - Please see SAFETY NOTICES ref. Coal set page 4.
Warning: The coals and the coal matrices are fragile ensure they are handled carefully. Ensure location is correct. Do not force the matrix into position. If the coals and/or the coal matrices are damaged they must be replaced with genuine Aarrow replacement sets. Warning: An incorrect coal layout may cause soot to build up inside the fire and therefore invalidate the guarantee.
Ensure the appliance is cold.
Step 1 Place the base matrix on the matrix plate centrally between the end tabs of the location bar. (Fig 4a)
Step 3 Becton 7 only. Locate 2 off end coals each side of the base matrix. (See underside of coals for hand identification) (Fig 4c).
Fig 4c
Fig 4a
Step 2 Place the rear matrix cut out section over the base matrix and centralise the assembly between the end tabs of the location bar. Ensure the rear matrix is pushed back against the location bar. (Fig 4b)
Fig 4b
8 | Becton Bunny & Becton 7 mk3 Gas stoves |