Regency FG39-LPG, FG39-NG DURA-FLUE Termination KIT, DURA-FLUE Fluing Components

Page 12

INSTALLATION

DURA-FLUE

TERMINATION KIT

Planning Your Dura-Flue

Installation

There are two basic types of Dura-Flue Room Sealed System installations: horizontal termi- nation and vertical termination. Confirm the maximum horizontal run and maximum vertical rise from the diagrams on page 9.

When planning your installation, it will be nec- essary to select the proper length of flue pipe for your particular requirements. For horizontal installations, determine the minimum clearance from the rear of the unit to the wall. It is also important to note the wall thickness. (The wall thimble is suitable for 2 x 4 or 2 x 6 / .6m x 1m or .6m x 2m wall construction.) Select the amount of vertical rise desired for "vertical-to- horizontal" type installations.

Warning: Always maintain required clear- ances (air spaces) to nearby combusti- bles to prevent a fire hazard. Do not fill air spaces with insulation.

The minimum clearance requirements between the outer wall of the flue pipe and nearby combustible surfaces is 1-1/4 inch. Be sure to check the flue termination clearance require- ments from decks, windows, soffits, gas reg- ulators, air supply inlets and public walkways as specified in the Exterior Flue Termination Locations on page 8 and in your local building codes.

Note: These are the minimum pieces required. Other parts may be re- quired for your particular instal- lation. See below for a list of flue parts.

If installing termination on a siding covered wall, a vinyl siding standoff or furring strips can be used in order to ensure that the termination is not recessed into siding.

The vinyl siding standoff is required for walls with vinyl siding.

Minimum components for a Dura-Flue Horizontal Installation:

A)Dura-Flue Horizontal Termination Kit

B)Wall Thimble (required for combus- tible walls)

Minimum components for a Dura-Flue Vertical Termination:

C)Dura-Flue Vertical Termination Kit

The Simpson Dura-Flue Room Sealed System offers a complete line of component parts for installation of both horizontal and vertical instal- lation. Many items are offered in decorative black, as well as galvanized finish. The galva- nized pipe and fittings are used for concealed

Vertical

Terminal

Storm Collar

Part # 953

locations such as attics or where corrosion is a factor, such as above the roof line. Decora- tive brass trim kits are available for both wall thimbles and ceiling support boxes.

Part # Description

971Horiz. Termination Kit includes: 90o black elbow, wall thimble cover, horiz. square termination cap, 24" black pipe, 11" -14" 5/8" adjustable

 

black pipe

970

Basic Horiz. Termination Kit

 

includes: 90o black elbow, wall

 

thimble cover, horiz. square

 

termination cap

978Vert. Termination Kit includes 0/12 - 6/12 pitch adjustable

flashing, storm collar, low profile term. cap

908B 6" (152mm) Pipe Length-Black

907B 9" (229mm) Pipe Length-Black

90612" (304mm) Pipe Length Galv.

906B 12" (304mm) Pipe Length-Black

90424" (610mm) Pipe Length Galv.

904B 24" (610mm) Pipe Length-Black

90336" (914mm) Pipe Length Galv.

903B 36" (914mm) Pipe Length-Black

90248" (1219mm) Pipe Length Galv.

902B 48" (1219mm) Pipe Length-Black

911B 11"-14 5/8" (219mm - 372mm) Adj. Pipe Length-Black

917B 17"- 24" (432mm - 610mm) Adj. Pipe Length Black

945

45O Elbow Galv.

945B

45O Elbow-Black

945G

45O Elbow-Swivel Galv.

990G

90O Elbow-Swivel Galv.

To determine the length of flue pipe required for vertical installations, measure the distance from the unit flue outlet to the ceiling, the ceiling thickness, the vertical rise in an attic or second storey, and allow for sufficient vertical height above the roof line.

For multi-storey applications, fire stops are required at each floor level. If an offset is needed, additional pipe, elbows and supports

Flashing

 

Vinyl Siding

Standoff (Optional)

943 or 943S

 

Part #950

 

Round

 

 

Ceiling Firestop

Support Box/

 

(Part # 963)

Wall Thimble

 

 

(Part # 940)

AstroCap

 

 

Round Support

 

Termination Cap

 

(Part# 946-523)

Box/Wall Thimble

 

 

 

(Part # 940)

 

Wall Thimble

 

 

 

 

Part # 942

will be required.

Do not exceed the maximum number of elbows. One 90o for horizontal terminations and two 45o for vertical termination.

DURA-FLUE FLUING

COMPONENTS

You will require the following components with your new Regency Room Sealed Freestanding Gas Stove. Please review your product to make sure you have everything you need. In the eflue that you are missing any part, contact your dealer.

Pipe Length

Adj.Pipe Length

 

11" - 14-5/8"

 

(279mm - 372mm)

 

90o Elbow

 

24" (610mm)

 

Pipe Length

Dura-Flue Basic

Horizontal Kit # 970

190o Elbow

1Wall Thimble Cover

1Astro Cap

12

Regency FG39 FireGenie Freestanding Gas Stove

Image 12
Contents Manual Please Keep These Instructions For Future ReferenceUnit Specifications Table of Contents Safety Label Installation SpecificationsGeneral Safety Information Save These InstructionsInstallation Checklist Clearances to CombustiblesLocating Your Regency GAS Stove Combustion and Ventilation AIRLouver Installation Installation PrecautionsSafety Precautions for Installer Flueing IntroductionExterior Flue Termination Locations Clearance k in mmFlue Restrictor setting at 40 Mj/h 31 Mj/h Flueing ArrangementsHorizontal Terminations for All Fluing Systems Flue Restrictor PositionDV Stove Horizontal Flue KIT #946-112 Installation DV Stove Horizontal Flue KITQty. Description OptionalInstallation Planning Your Dura-Flue Installation DURA-FLUE Termination KITDURA-FLUE Fluing Components DURA-FLUE Horizontal Installations DiagramHint Apply silicone to female end DURA-FLUE Vertical Termination Hole previously drilledOffset Chart Cathedral CeilingsSupport Extensions Round Rdse or Square Sqse MasticGAS Pipe Pressure Testing Aeration AdjustmentGAS Connection Pilot Orifice Extrusion Assembly Tube Burner OrificeAntenna Control Box Cover Jumper LocationAdjusting the Outlet Pressure Cable Electric ModulatorLOG SET Installation Conversion to Lower BTU RatingLPG Conversion Kit Contains Additional Piece pkg. with unitPins on Rear Log Support Lava rockPinCutout NotchFront Door Installation Optional Remote Control Final CheckPackaged separately Wiring Away from sharp edgesOperating Instructions Pilot Adjustment Summary ControlsNormal Operating Sounds GAS Appliances Copy of the Lighting Plate Instructions 918-332aMaintenance Maintenance InstructionsGOLD-PLATED Doors LOG Replacement Latch AdjustmentGlass Replacement Door GasketFAN Maintenance Fan ReplacementAlternate Fan Access Pin Ground Molex Connector Wire Manual Switch Reset CablesRemoving Valve Tray Parts List Electronic Components Parts ListRegency FG39 FireGenie Freestanding Gas Stove FG39 Main Assembly Description Part#FG39 Burner & LOG Assembly FG39 Door Assemblies Regency FG39 FireGenie Freestanding Gas Stove Warranty Warranty LifetimeConditions Exclusions

FG39-NG, FG39-LPG specifications

The Regency FG39 series comprises two distinct gas fireplaces, the FG39-NG (natural gas) and the FG39-LPG (propane), embodying a perfect blend of functionality, design, and efficiency. These models cater to homeowners seeking an elegant heating solution that combines aesthetic appeal with modern technology.

One of the standout features of the Regency FG39 series is its advanced burner system. Designed for maximum heat output and efficiency, the interlocking burner design produces realistic flames that enhance the ambiance of any room. The flames are adjustable, allowing users to customize their heating experience to suit their preferences and home environment. With an impressive thermal efficiency rating, these fireplaces not only provide warmth but also do so while conserving energy.

An important characteristic of the Regency FG39 series is the extensive range of customizable options available. Homeowners can choose from various decorative fronts, media options like rocks and logs, and colors that complement their interior design themes. This modular approach allows the fireplace to blend seamlessly with any decor, while still standing as a stunning focal point.

Additionally, both models feature a sleek, contemporary design with a large viewing area that maximizes the fire's visual impact. The tempered glass doors not only enhance safety but also add a touch of sophistication. The clean lines and minimalist aesthetic make these fireplaces ideal for both modern and traditional homes.

Technologically, the Regency FG39 series is equipped with high-performance ventilation systems that ensure optimal airflow and heat distribution. This allows for versatile installation options, granting homeowners the flexibility to position the unit in various spaces without compromising on performance.

Furthermore, the unit's easy-to-use digital remote control elevates the user experience. With the ability to adjust temperature settings and flame levels from anywhere in the room, comfort is easily attainable at the touch of a button.

In conclusion, the Regency FG39-NG and FG39-LPG fireplaces offer a compelling solution for homeowners looking for a combination of style, efficiency, and advanced technology. With customizable options, impressive heating systems, and sleek designs, these fireplaces represent the epitome of modern heating solutions, enhancing any living space while ensuring comfort and luxury.