Safety Guidelines, Description | Wayne ESP45 instruction

PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

OPERATING	MODEL
INSTRUCTIONS	ESP45
AND PARTS
MANUAL

24-Volt Backup Sump Pump

SAFETY GUIDELINES

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to

PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury.

Notice indicates important information, that if not followed, may cause damage to equipment.

DESCRIPTION

The ESP45 is a battery operated back- up sump pump. It does not replace a regular pump. It is designed to provide protection in the event household electrical power fails or main pump fails.

UNPACKING

Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, return the unit to the place of purchase for replacement. Failure to do so could result in serious injury or death.

GENERAL SAFETY INFORMATION

CALIFORNIA PROPOSITION 65

This product or its power cord contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

GENERAL SAFETY

Do not use to pump

ﬂammable or explosive ﬂuids such as gasoline, fuel oil,

kerosene, etc. Do not use in a ﬂammable and/or explosive atmosphere. Personal injury and/or property damage could result.

Disconnect power before servicing. If the power disconnect is out of sight, lock

in the open position and tag it to prevent unexpected application of power. Failure to do so could result in fatal electrical shock!

If the basement has water or moisture on the floor, do not walk on wet area until all power is turned off. If the shutoff box is in the basement , call an electrician. Remove pump and either repair or replace. Failure to follow this warning could result in fatal electrical shock.

All wiring must be performed by a qualiﬁed electrician.

Do not expose battery to sparks or ﬂames as an explosion or ﬁre could result.

Battery acid is corrosive. Avoid spilling on skin or clothing. Eye protection must

be worn when handling the battery.

A check valve must be used on the primary sump pump discharge.

SPECIFICATIONS

Power supply requirements	120V, 60 Hz
Motor	Permanent Magnet DC Motor
Normal water removal	2880 GPH @5 ft. @ 26V DC
Liquid temperature range	40º F to 120º F
Circuit requirements	5 amps AC (min)
Pump Dimensions	11 inch high x 8-3/4 inch base
Pump Run Time	15 Seconds

CONSTRUCTION

Motor housing	Cast Iron
Impeller	Thermoplastic
Shaft seal	Stainless Steel
Discharge	1-1/2 inch NPT
Float Switch	Reed Style

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

© 2010 WAYNE Pumps	For parts, product & service information	353502-001 3/10
	visit www.waynepumps.com

ESP45 specifications

The Wayne ESP45 is a standout model in the world of submersible sump pumps, renowned for its efficiency, durability, and innovative technology. This pump is designed for residential and commercial applications, providing reliable protection against water damage caused by flooding or excess groundwater.

One of the key features of the Wayne ESP45 is its powerful motor. Equipped with a 1/2 HP motor, it is capable of displacing up to 4,600 gallons of water per hour. This makes it suitable for handling heavy inflows during significant rain events or for managing water pooling in basements. The motor is also thermally protected, ensuring it doesn’t overheat during prolonged use, thereby enhancing its longevity.

The ESP45 employs a superior engineering design that includes a durable thermoplastic construction. This material protects the pump from corrosion and wear, ideally suited for dealing with harsh conditions typically found in sump applications. The pump is designed for consistent performance and operates quietly, minimizing disturbances in your living space.

One of the standout technologies in the Wayne ESP45 is its vertical float switch, which provides automatic operation. This feature allows the pump to turn on and off based on water levels, ensuring that your sump area is always protected without the need for manual intervention. The float switch is built to withstand wear and tear, allowing for reliable operation over time.

Another characteristic that sets the Wayne ESP45 apart is its ease of installation. The pump comes with a simple setup process, featuring a standard 1-1/2 inch NPT discharge that easily connects to existing plumbing systems. This allows homeowners and contractors to install the pump quickly, making it an ideal choice for those looking to enhance their water management solutions efficiently.

Moreover, the Wayne ESP45 is compatible with various backup systems, offering peace of mind by ensuring that it remains operational during power outages. This versatility increases its reliability, making it a go-to option for anyone looking to safeguard their property from water damage.

In summary, the Wayne ESP45 combines powerful performance, durable construction, and innovative technology, making it one of the most reliable submersible sump pumps available. With its efficient motor, advanced automatic operation, and simple installation process, it serves as an essential tool for protecting homes from flooding and water damage.