Quartz QZ3111 Quartz Thermo installation guide, Fit the rail end clip fitting into position into

7Drill and plug two holes 642mm-655mm vertically apart using a spirit level if

necessary. Fit the rail end clip into position and loosely fit the lower bracket into position.

8Pass the rail through the handset holder whilst keeping the slider levers depressed

with the handset holder pointing in a downward direction.

9Carefully slide the gel hook onto the rail under the handset holder.

10	Current water supply regulations state the handset should not be allowed to
	pass a point 25mm above the spill over level of the bath or shower tray.

If this cannot be achieved, the hose must be passed through the gel hook which has also been designed to be utilised as a hose restraint.

11 Fit the rail into the rail end bodies taking care to engage the location slot onto the lugs.

12	Fit the rail end clip fitting into position into
	the top rail end body and secure the rail

assembly to wall using the screws provided ensuring the rail and rail end bodies remain firmly engaged.

13	Place the rail end covers into position and
	push firmly into place.

Quartz Thermo installation guide page 10