Nortec MH Series installation manual Resetting the Hours Meter of the UV Lamp

Page 30

1.3RESETTING THE HOURS METER OF THE UV LAMP

After replacing the UV lamp (option) the hours meter of the UV lamp must be reset. Note: If the hours meter of the UV lamp is not reset within 168 hours the UV maintenance warning an error message is triggered.

Select the maintenance menu:

Path: Main menu > User > Password entry: 8808 > Maintenance

Select “Module A”, then press the <Set> key.

Select "UV lamp Rst”, then press the <Set> key.

The reset dialogue shows up in the display.

Press the <Yes> key to reset the hours meter of the UV lamp.

Note: Press the <Esc> or <No> key if you wish to abort the reset procedure.

To return to the standard operating display press the <Esc> key several times.

10-20

Page 26 2008-12-03

Image 30

Contents SeriesTM 2544831-ARevision Number Date Date Put Manual Table of Contents This page Intentionally Left Blank Introduction Safekeeping SafetyLimitation Copyright protectionFunction of the Display and Operating Elements DisplaySwitching the Control Unit on and OFF Remote Operating and Fault IndicationOverview and Operating of the Menu Menu OverviewExplanation of Configuration Settings Explanation of the Status Information Indication StatusInfo Page Clean Trg Info Page Box drying Info Page UV Module optionExplanation of Unit Information Path Main menu Info Unit StatusExplanation of Error History List Path Main menu Info Error HistoryConfiguration Factory setting English Unit SettingsLaunching the unit settings menu Select dialogue languageControl Settings Description of the SettingsFactory setting Options Setting the capacity limitationDescription of the Settings Factory settingSetting the Cleaning Mode Mhtc Reflow only Factory setting DrainConfiguring the cleaning trigger 1 Clean Trg 10-10 Configuring the humidification box drying Configuring the Humidifier Maintenance Interval Activating/deactivating the softstart functionPerforming remote relay tests Factory setting None Seconds Setting range 1...600 SecondsThis page Intentionally Left Blank Operational Functions Empties. The yellow LED flashes Carrying OUT Manual Draining / Pipe FlushingBriefly press the drain key . The drain/flush Yellow LED flashesResetting the Maintenance Indication Path Main menu User Password entry 8808 MaintenanceResetting the Hours Meter of the UV Lamp Troubleshooting Fault Indication Fault IndicationTroubleshooting 1.2.1 System Faults Unit Faults Tub the float is not open Maximum lifespan UV lamp reached 2008-12-03 Resetting the Error Indication Warranty Authorized Agent