Nilfisk-ALTO SR1800C B-D Technical Data, Packing, General Checks, Use, Machine Layout

Page 55

USER MANUAL

Before handling the machine, the route from where the vehicle is parked to where the machine is to be installed should be checked beforehand for any danger areas.

NOTE

Check that the floor is not too uneven, avoid driving the vehicle at high speeds, and avoid excessive swaying of the transported machine.

WARNING!

It is forbidden to get onto the machine, or stand or walk under it.

Lift the machine or the boxes as needed to handle the machine.

PACKING

Packing should be disposed according to the law in force.

INSTALLATION

When delivered, the machine is completely assembled and perfectly working, so it does not require any installation by the customer.

GENERAL CHECKS

Make sure the machine has been inspected before delivery (check the warranty).

Check that the machine has not suffered any damage during transportation and carry out the preliminary operations for setting the machine at work according to the instructions in the manual.

Check the hydraulic system oil level in the tank.

Check the brake fluid level.

Check the engine oil level.

Check radiator coolant level.

Refuel.

Start the machine.

Follow the maintenance instructions.

TECHNICAL DATA

USE

The sweeper has been designed to perform a complete cycle of industrial and urban cleaning: sweeping, waste collecting and dumping.

NOTE

Any use other than the one described can damage the machine or injure the operators.

The sweeping is carried out by one or more side brooms which convey the debris towards the centre of the machine and a cylindrical main broom sweeps the collected debris into the hopper. The dust is collected and controlled by a fan. The air released into the environment is filtered by a filter. The waste collected in the hopper may be dumped onto the ground or into special boxes at a maximum height of 1,510 mm.

MACHINE LAYOUT

SR 1800C D (See Fig. E)

1.Fan

2.Side broom

3.Hydraulic system oil tank

4.Steering wheel

5.Fuel tank

6.Drive hydraulic motor

7.Rear wheel

8.Frame

9.Engine

10.Drive hydraulic pump

11.Main broom hydraulic motor

12.Main broom

13.Accessory hydraulic pump

14.Dust suction filter

15.Hopper

16.Front wheels

17.Side broom hydraulic motor

18.Battery

19.Fan motor

33014817(2)2006-06 A

5

Image 55
Contents Modell/Modèle/Model/Model 3301481722006-06 aEN 60335-1, EN 1616 Allgemeine Anweisungen BetriebsanleitungMaschinenidentifizierung EinleitungAllgemeine Anweisungen VorbedingungVerantwortlichkeit DES Bedieners Terminologien UND Ihre BedeutungSicherheitsvorschriften Siehe Abb. C TRANSPORT, VERLAGERUNG, InstallationWarnzeichen Ablanden UND VerlagernTechnische Eigenschaften Maschinenbeschreibung Sicherheitssysteme SR 1800C D Technische DatenSR 1800C B Steuerungen UND Instrumente AnwendungUmgebungswerte GeräuschpegelGebrauchsanweisungen Maschinenabstellen Gebrauch DER MaschineStörungen UND Abhilfen Störungen UND AbhilfenBetriebsanleitung Übermäßige Erwärmung des Motors SR 1800C B Allgemeine Reinigung der Maschine Reinigung UND WartungReinigung Planmässige WartungStunden WartungstabelleAlle WartungGleichstrom-Fahrmotor SR 1800C B Ausserordentliche Wartung Betriebsbatterie Überladung LadungWartung Abbau ABBAU, EntsorgungEntsorgung Position DER Sicherungen PläneSchaltpläne Siehe Abb. AJ Schaltplan SR 1800C BDritter Seitenbesen Zubehör UND SonderausstattungHydraulikanlage SaugschlauchManuel Dutilisation Avertissements Generaux IntroductionTerminologie ET Signification Precautions Pour LA Securite DES OperateursResponsabilite DE Loperateur Voir Fig. C TRANSPORT, MANUTENTION, InstallationSignaux Dattention Dechargement ET ManutentionUtilisation Prevue Caracteristiques TechniquesEmballages Controles GenerauxConteneur déchets Description DE LA MachineSR 1800C B Voir Fig. F ChâssisSystemes DE Securite Valeurs Donnees Techniques PrincipalesDonnées générales Moteur dieselNiveau DE Bruit Commandes ET InstrumentsUtilisation Valeurs EnvironnementalesInstructions Pour Lutilisation Arret DE LA Machine Utilisation DE LA MachineProblemes ET Remedes Problemes ET RemedesContrôler la pression de la pompe à Réchauffement excessif du moteur SR 1800C B Nettoyage général de la machine Nettoyage ET EntretienNettoyage Entretien PeriodiqueLes Tableau DentretienToutes Toutes EntretienMoteur à courant continu de traction SR 1800C B Entretien Extraordinaire Batterie DE Service Surcharge ChargeEntretien Demantelement DEMANTELEMENT, EcoulementEcoulement Schemas Electriques SchemasPosition Fusibles Voir fig. AJ Schéma électrique SR 1800C BTroisieme Brosse Accessoires ET OptionsSysteme Hydraulique Tuyau DaspirationHydraulic System Purpose Safe-Keeping General WarningsForeword Machine IdentificationExposed person Operators Safety PrecautionsDefinitions Operators ResponsibilityDischarge and Handling TRANSPORTATION, HANDLING, InstallationSee Fig. C USE Technical DataPacking General ChecksMachine Description Safety Systems Values Main Technical DataGeneral data Diesel engineControls and Instruments USEEnvironmental Conditions Noise LevelInstructions for USE Machine Stop Machine USEProblems and Remedies Problems and Remedies3301481722006-06 a Motor overheating SR 1800C B Machine general cleaning Cleaning and MaintenanceCleaning Periodical MaintenanceHours Maintenance TableMaintenance 000 EveryDrive direct current motor SR 1800C B Extraordinary Maintenance Accessory Battery Overcharge MaintenanceDismantling DISMANTLING, DisposalDisposal Wiring Diagrams DiagramsFuse Positions See Fig. AJ Wiring diagram SR 1800C BThird Broom Accessories and OptionsHydraulic System Suction HoseAlgemene Waarschuwingen GebruikershandleidingIdentificatie VAN DE Machine InleidingAlgemene Waarschuwingen VoorwoordGevarenzones DefinitiesVerantwoordelijkheid VAN DE Bediener Veiligheidsmaatregelen Voor DE BedienerZie Afb. C VERVOER, HANTERING, InstallatieWaarschuwingstekens Lossen EN BedieningTechnische Gegevens Beschrijving VAN DE Machine Veiligheidssystemen Motor Waarden Belangrijkste Technische GegevensAlgemene gegevens Waarden Dieselmotor WaardenBedieningen EN Instrumenten GebruikMilieu GeluidsniveauZonder koplampen Zie Afb. L GebruiksinstructiesZonder koplampen Zie Afb. J SR 1800C B Met koplampen Zie Afb. KMachinestop Gebruik VAN DE MachineAfvalverzameling Problemen EN Oplossingen Problemen EN OplossingenGebruikershandleiding Oververhitting motor SR 1800C B Algemene reiniging van de machine Reiniging EN OnderhoudReiniging Periodiek OnderhoudOnderhoud OnderhoudstabelNa 50 uur Aandrijving gelijkstroommotor SR 1800C B Buitengewoon Onderhoud Extra Accu Overladen OpladenOnderhoud Demonteren DEMONTEREN, AfdankenAfdanken BEDRADINGSSCHEMA’S SCHEMA’SZekeringenposities Zie Afb. AJ Bedradingsschema SR 1800C BDerde Borstel Accessoires EN OptiesHydraulisch Systeem Aanzuigslang13f 13a 13b13e 13i 13j 13k3301481722006-06 a 3301481722006-06 a 3301481722006-06 a 16 159 86 3301481722006-06 a 3301481722006-06 a 3301481722006-06 a 3301481722006-06 a Page 530 520 111 104 345 560 480 570 520 830 376 15 16 770

SR1800C B-D specifications

The Nilfisk-ALTO SR1800C B-D is a powerful, efficient, and versatile ride-on scrubber drier designed for cleaning large areas in industrial, commercial, and retail environments. Combining advanced technology and user-friendly features, this machine streamlines the cleaning process while ensuring high-quality results.

One of the standout features of the SR1800C B-D is its impressive cleaning capacity. With a working width of 800 mm, it can cover expansive areas in a shorter amount of time. The dual scrubbing brush system enhances cleaning efficiency, allowing for thorough dirt and grime removal in various surfaces, including tile, concrete, and linoleum. The machine’s robust build quality ensures durability and longevity even in the most demanding environments.

Another notable aspect of the SR1800C B-D is its innovative Ecoflex system. This technology allows users to adjust the detergent dosage and water flow according to the specific cleaning task at hand. By using just the right amount of resources, the Ecoflex system promotes sustainable cleaning practices, reduces water usage, and minimizes environmental impact without compromising cleaning performance.

The machine is equipped with a highly efficient vacuum system that enhances drying performance. This feature not only helps to expedite the cleaning process but also reduces slip hazards, making it a safer option for both staff and customers in high-traffic areas. The adjustable suction power ensures that various floor types can be cleaned effectively.

User comfort is also a priority in the design of the SR1800C B-D. Its ergonomic controls and adjustable seat make it easy to operate for extended periods, reducing operator fatigue. The clear visual display provides essential information, such as battery level and service alerts, ensuring that users can maintain the machine effectively.

In terms of maintenance, the Nilfisk-ALTO SR1800C B-D is designed for easy access to components, simplifying routine tasks such as brush changes and tank cleaning. This thoughtful design significantly reduces downtime, allowing for consistent and uninterrupted cleaning operations.

In conclusion, the Nilfisk-ALTO SR1800C B-D offers an exceptional combination of efficiency, versatility, and user-friendly features. With its advanced cleaning technologies and focus on sustainability, this scrubber drier is an ideal choice for organizations looking to maintain cleanliness and safety in their facilities while optimizing operational costs.