Remote controller, Front panel facilities

Front panel facilities

Return button [27]

Press to exit the Main menu level or go back one level up.

Memory button [49]

This button is used to assign the radio station that is currently tuned in to a preset channel or delete a previously preset station.

FM Mode button [48]

If you are listening to an FM radio station in stereo and the sound cuts out or there is a great deal of noise, switch from STEREO to MONO. Each time this button is pressed, the AUTO indication turns on and off, and the stereo mode changes from AUTO to MONO and vice versa.

Listening Mode buttons [51]

Press these buttons to select a listening mode for the current input source.

Stereo: Selects for normal stereo output.

Surround: Selects for the Dolby Pro Logic, Neo:6, Dolby Digital, or DTS listening modes.

THX: Selects for the THX listening mode.

DSP /: Switches to the listening mode before or after the current one.

Direct button [51]

The direct mode outputs the sound without sound adjustment or filtration. In the direct mode, even if the Subwoofer setting of the Speaker Config sub-menu is set to “Yes,” no sound is output from the subwoofer and the left and right channels are output, as is, to the left and right speakers. Even for multichannel input signals, the sounds are not passed through the sound adjustment circuits.

Remote controller

HOME THEATER CONTROLLER

RC-461M

SEND/LEARN indicator

This indicator acts as a guide when commands are programmed into or sent by the remote controller. It also warns the user when an error is made or battery power is low.

ON/STDBY button [26]

ON: Turns on the DTR-7.2.

STDBY: Places the DTR-7.2 in the standby state.

Be aware that pressing the STDBY button only places the DTR-7.2 in standby and does not turn the power completely off.

SLEEP button [52]

Sets the sleep function.

The SLEEP button enables you to set the DTR-7.2 to turn off automatically after a specified time period.

DIRECT MACRO button [68]

For executing and programming the Direct Macro function.

MODE buttons and indicators [56-59, 62-69]

For selecting the component to be operated by the remote controller. When a MODE button is pressed, it will light green for 8 seconds. The selected MODE button will also light whenever any other operation button is pressed to tell you which mode the remote controller is in.

RETURN button [27]

For entering the selected setting and returning to the previous menu.

CH , DISC button [49, 56-58, 62, 63]

When in the RCVR mode, for selecting a tuner preset channel.

For selecting the disc to be played back for components with disc changers when in the DVD or CD modes.

CH SEL/TOP MENU button

CH SEL: For selecting the speaker for level adjustment when in the RCVR mode. Used together with the LEVEL / buttons. [52]

TOP MENU: When in the DVD mode, for displaying the menu screen(s) recorded on DVD media. [58]