Audio Adjust
3-8. Surround Setup
Select this to modify the plain Dolby Digital, DTS, and Pro Logic II Surround listening modes. The parameters that can be set are shown in the table below.
|
| Parameter | Setting |
|
|
| Initial value |
a | Surr Mode | Pro Logic II Movie | Pro Logic II Movie |
| (Analog/PCM) | Pro Logic II Music |
|
|
| DTS Neo:6 Cinema |
|
|
| DTS Neo:6 Music |
|
|
|
|
|
b | Surr Mode | Pro Logic II Movie | Pro Logic II Movie |
| (D.F.2ch) | Pro Logic II Music |
|
|
|
|
|
c | Auto, On, Off | Auto | |
|
|
| |
<Pro Logic II Music> |
|
| |
d | Panorama | Off, On | Off |
|
|
|
|
e | Dimension | 0, 1, 2, 3, 4, 5, 6 | 3 |
|
|
|
|
f | Center Width | 0, 1, 2, 3, 4, 5, 6, 7 | 3 |
|
|
|
|
a) Surr Mode (Analog/PCM)
Changes the surround mode for
b) Surr Mode (D.F.2ch)
Changes the surround mode for
c)
Selects
Auto: When the DTS source has the
On: When the DTS source has the
Off: Even when the DTS source has the
d) Pro Logic II Music Panorama
Use this listening mode to expand sound space in front of a listener to both side of the listener.
On: Turns on the PL II Music Panorama mode.
Off: Turns off the PL II Music Panorama mode.
e) Pro Logic II Music Dimension
Use this listening mode to modify the sound space location forward or backward.
The setting of “3” is the normal position and setting to “2” or lower moves the sound space forward and setting to “4” or higher move the sound space backward.
If the stereo recording has excessive broadness or too strong surroundness, move the sound space forward to get the appropriate sound balance. In contrast, if the stereo recording is somewhat felt like monaural or has narrowness, move the sound space backward to get more surroundness.
f) Pro Logic II Music Center Width
In Pro Logic II decoding, outstanding center signal will be output only from center speaker. When the center speaker is not used, the decoder divide the center signal equally to each front left and right speakers to create “phantom” center sound image.
The Pro Logic II Music Center Width mode allows you to adjust where the center sound image is heard from. Depending on your setting, the center sound image will be heard from center speaker only, front left and right speakers (as phantom center sound image), or all three speakers (center, front left and right) in various level combinations. For home use, applying some “width” to center signal will improve the level balance for center and main speakers, and effect the width of the center sound image, or “mass” of the sound. Many of sound recordings processed for stereo playback will be reproduced better by controlling the parameter for this listening mode. The recommended setting for Pro Logic II Music mode is “3.” This allows you to easily distinguish the Pro Logic II Music mode from the Pro Logic II Movie mode whose setting is automatically set to “0.”
Select this Setup THX listening modes; the one that is currently set is the one that is modified. The parameters that can be set are shown in the table below.
|
| Parameter | Setting |
|
|
| Initial value |
a | Off, On | On | |
|
|
|
|
b | Decoder (Analog/PCM) | PL II, Neo:6 | PL II |
|
|
|
|
c | THX Surround | Off, On | Auto |
| (Dolby D) |
|
|
|
|
|
|
a)
This can be set to either “On” or “Off.”
This parameter is only enabled for the THX listening mode. Also, this is set to “On” when the
b) Decoder
Select the decoding mode for THX processes.
PL II: Select for Dolby Pro Logic II Movie.
Neo:6: Select for DTS Neo:6 Cinema.
c) THX Surround EX (Dolby D)
This setting allows you to set whether or not Dolby Digital sources will be played back using THX Surround EX when a surround back speaker is connected.
Auto: Automatically outputs signals with
On: Outputs using THX Surround EX regardless of whether or not the signal contains EX identifiers.
Off: Does not output using THX Surround EX regardless of whether or not the signal contains EX identifiers.
44