Integra DTR-7.2 instruction manual Audio Adjust Setup menu

Audio Adjust

3. Audio Adjust Setup menu

Set the various parameters for the sound signals.

3-1. Tone Control

Separately adjust the bass and treble settings as desired in 2-decibel units.

Advanced Menu

Advanced Menu

3.Audio Adjust

1.Tone Control

2.Surround Speakers

3.Sound Effect

4.Delay

5.LFE Level

6.Mono Setup

7.Theater-Dimensional

8.Surround Setup

Advanced Menu

3.Audio Adjust

9.THX Setup

10.Mono Movie Setup

11.Enhanced 7 Setup

12.Orchestra Setup

13.Unplugged Setup

14.Studio Mix Setup

15.TV Logic Setup

→default

Basic Menu

3.Audio Adjust

1.Tone Control

2.Surround Speakers

3.Sound Effect

→default

3.Audio Adjust

3-1.Tone Control
a.Bass	:	0
b.Treble	:	0
	Quit:SETUP

		Parameter	Setting
			Initial value
a	Bass	–12 to +12	0
b	Treble	–12 to +12	0

Note:

If Direct or THX is selected as the listening mode, these settings cannot be made. To make these settings, first select another listening mode.

3-2. Surround Speakers

This setting allows you to decide which speakers to output to when surround back speakers are connected and you are playing back a 5.1-channel source.

Parameter	Setting
	Initial value
a Surround Speakers Surround L/R, Surround Back,	Surround L/R
Surr L/R + Back

Surround L/R: This outputs the sound to the surround left and right speakers as normal and outputs nothing to the surround back speaker.

Surround Back: This outputs the sound to the surround back speakers and outputs nothing to the surround left and right speakers.

Surr L/R+Back: This outputs the sound to both the surround left and right speakers and the surround back speaker.

Note:

If the Surr Back Out setting in the Speaker Config sub menu is set to “1ch,” the Surround Speakers sub menu is disabled.

41