Integra DTR-7.6/6.6 instruction manual Connecting a VCR or DVD Recorder for Playback

DTR-7.6,6.6.book Page 27 Monday, September 26, 2005 1:40 PM

Connecting Your Components—Continued

Connecting a VCR or DVD Recorder for Playback

In addition to video playback, with this hookup, you can use your VCR’s tuner to listen to your favorite TV programs via the AV receiver, useful if your TV has no audio outputs.

If you have two video recorders (e.g., a VCR and a DVD recorder), connect one recorder to the VIDEO 1 IN jacks, as shown here, and connect the other recorder to the VIDEO 2 IN jacks in the same way.

Step 1: Video Connection

Choose a video connection that matches your VCR or DVD recorder ( A , B , or C ), and then make the connection. If you use connection A , you must connect the AV receiver to your TV with the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches your VCR or DVD recorder ( a , b , or c ), and then make the connection.

•With connection , you can listen to the VCR or DVD recorder even in Zone 2.

•To enjoy Dolby Digital and DTS, use connection or . (To listen in Zone 2 as well, use and , or and .)

Connection		AV receiver	Signal flow	VCR or DVD recorder	Picture quality
	A	COMPONENT VIDEO IN 2	⇐	Component video output	Best
		VIDEO 1 IN S	⇐	S-Video output	Better
	B
	C	VIDEO 1 IN V	⇐	Composite video output	Standard
		VIDEO 1 IN L/R	⇐	Analog audio L/R output
	a
	b	DIGITAL COAXIAL IN 2	⇐	Digital coaxial output
		DIGITAL OPTICAL IN 1	⇐	Digital optical output
	c

b COAXIAL IN 2

c OPTICAL

IN 1

A COMPONENT VIDEO

IN 2

Y

PB

VIDEO 1	C
IN
V

IN	B
VIDEO 1
S
IN	a
L

R

VIDEO 1

PR

				L		R
COAXIAL	OPTICAL	Y	PB	PR	AUDIO	S VIDEO	VIDEO
OUT	OUT	COMPONENT VIDEO OUT			OUT	OUT	OUT

Connect one or the other

VCR,

DVD recorder

27