Integra DTR-7.6/6.6 instruction manual Checking the Results

Page 40

DTR-7.6,6.6.book Page 40 Monday, September 26, 2005 1:40 PM

First Time Setup—Continued

Checking the Results

If you selected “Check the Results” in step 4 on the pre- vious page, the following menu appears and you can check the results of the automatic speaker setup.

Auto Speaker Setup

========================

1.Warning 2.Speaker Config 3.Speaker Distance 4.Speaker Level Adjust 5.Equalizer Settings

1.Warning—Undetected speakers and position warn- ings (see the right column).

2.Speaker Config—Connected speakers and crossover frequencies.

3.Speaker Distance—Distance from each speaker to the listening position.

4.Speaker Level Adjust—Optimum volume level for each speaker.

5.Equalizer Settings—Optimum equalizer settings for each speaker.

Use the Up and Down []/[ ] buttons to select the item that you want to check, and then press [Enter].

Press the [Return] button to return to the previous menu.

1.Warning

========================

Not Detect:

Distance Error:

2.Speaker Config

 

========================

Subwoofer

 

:No

Front

:80Hz(THX)

Center

:80Hz(THX)

Surround

:80Hz(THX)

SurrBack

:80Hz(THX)

SurrBack

ch

:2ch

3.Speaker Distance

========================

Left

:12ft

Center

:12ft

Right

:12ft

Surround R

: 7ft

SurrBack

: 7ft

Surround L

: 7ft

Subwoofer

:12ft

4.Speaker Level Adjust

========================

Left

: 0dB

Center

: 0dB

Right

: 0dB

Surround R

: 0dB

SurrBack

: 0dB

Surround L

: 0dB

Subwoofer

: 0dB

5.Equalizer Setting

========================

Channel: Left

========================

80Hz : 0dB

250Hz : 0dB

800Hz : 0dB

2.5kHz : 0dB

8kHz : 0dB

40

When you’ve finished checking, press the [Return] button to return to the menu in step 4.

Auto Speaker Setup

========================

Apply the Results

Check the Results

Retry

Retry with

Test noise Level up

Cancel

Warning Messages

In the warning messages, abbreviations are used to iden- tify the speakers (e.g., “L” for left, “R” for right, and so on).

Not Detect:

The speaker was not detected. Make sure that it’s connected properly.

Distance Error:

The speaker is either too close or too far away, or the distance could not be measured. Reposition the speaker.

Changing the Speaker Settings Manually:

In some situations, the measurements taken by the auto- matic speaker setup may not provide usable results. If running the speaker setup a second time still doesn’t pro- vide usable results, you’ll have to set the speaker settings yourself (see pages 66–71).

Please note that any THX main speakers should be set to 80 Hz (THX). If you set up your speakers using Auto- matic Speaker Setup, please make sure manually that any THX speakers are set to 80 Hz (THX) in the Speaker Configuration setting (see pages 66, 67).

Sometimes due to the electrical complexities of sub- woofers and the interaction with the room, THX recom- mends setting the level and the distance of the subwoofer manually.

Using a Powered Subwoofer:

If you’re using a powered subwoofer, because it’s posi- tioned low down on the floor and outputting very low frequency sounds, its output may not be detected prop- erly. If the subwoofer (abbreviation “SW”) appears on the Warning screen under Not Detect, turn up the sub- woofer’s volume and run the automatic speaker setup again. If the subwoofer has a built-in crossover, set it to the highest crossover frequency. If it has an LPF filter switch, set it to off or direct. Refer to your subwoofer’s instruction manual for details.

Image 40
Contents DTR-7.6/6.6 Important Safety Instructions AvisPrecautions PowerSupplied Accessories Make sure you have the following accessoriesContents Features DTR-7.6 and DTR-6.6DTR-7.6 Only DTR-6.6 OnlyInstalling the Batteries Before Using the AV receiverUsing the Remote Controller Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplayDTR-7.6 Rear PanelDTR-6.6 Component Video in 1, 2, Hdmi in 1, 2, and OUT DTR-7.6 onlyXM antenna on North American model Video 1 IN/OUT and Video 2 IN/OUTAbout the Remote Controller Modes Remote ControllerReceiver/Tape Mode Remote Controller DVD Mode CD, MD, and CDR Modes HDD Mode Connecting Your Speakers Enjoying Home TheaterConnecting Your Speakers Connecting Your SpeakersSpeaker Connection Precautions Connecting the Speaker CablesRead the following before connecting your speakers Strip about 5/8Connecting Antenna Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Audio and Video Signals to the AV ReceiverWhich Connections Should I Use? Video Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD player Hooking Up the Multichannel DVD Input Connecting a VCR or DVD Recorder for Playback Connecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Connecting a Camcorder, Games Console, or Other Device Connecting a Turntable Connecting a CD PlayerStep Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting a Power AmplifierConnecting Components Auto Power On/StandbyConnecting Components with Hdmi DTR-7.6 Only About HdmiSupported Audio Formats About Copyright ProtectionMaking Hdmi Connections Connecting the Power Cords of Other Components Connecting the RS232 PortConnecting the Power Cord Standby indicator lights upDo the automatic speaker setup-this is essential Turning On the AV ReceiverTurning On and Standby Smooth Operation in a Few Easy StepsPut the speaker setup micro Phone in the listening positionTurn on the AV receiver Connected TVFirst Time Setup Disconnect the speaker setupPress Enter On completion, the following menu appearsChecking the Results Hdmi Video Setup DTR-7.6 Only Press the Setup buttonSetup closes Hdmi Video menu appearsComponent Video Setup Lowed by the Setup buttonPress the Receiver button, fol Component Video menu appearsDigital Audio Input Setup Setup closesDTR-7.6 only Digital Input menu appearsChanging the Input Display Minimum Speaker Impedance TV Format Setup Not North American models AM Frequency Step Setup on some modelsUse the Up and Down Buttons to select 8. HardwareSelect a listening mode and enjoy Playing Your AV ComponentsBasic AV Receiver Operation Start playback on the source componentTuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Displaying AM/FM Radio InformationListening to the Radio Connecting the XM AntennaSigning Up for XM Satellite Radio Channel Search mode Mode button, followed bySelecting XM Radio Channels Use the Up and Down Buttons to select a channelDisplaying XM Radio Information Selecting XM Channels from the Front PanelButtons to select a chan NelPositioning the XM Antenna XM Radio MessagesPresetting AM/FM Stations Selecting PresetsDeleting Presets XM ChannelsUsing the Multichannel DVD Input Using the Multichannel DVD InputMultichannel DVD Input Settings Input ChannelAdjusting Speaker Levels Setting the Display BrightnessCommon Functions Muting the AV ReceiverUsing the Sleep Timer Using HeadphonesCommon Functions Displaying Source InformationUsing the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV ReceiverUsing the Listening Modes DVDUse this mode with any stereo or TV, DVD, VHS Use this mode with any stereo movie e.g., TV, DVD, VHSAbout the Listening Modes Sound is output by the front left and right speakersThis mode is designed for use with video games Onkyo Original DSP ModesRecording Audio and Video from Separate Sources RecordingRecording the Input Source Onscreen Setup Menus About the Onscreen Setup MenusAudio Adjust Menu Adjusting the Listening ModesUsing the Re-EQ Function Adjusting the Listening Modes Tone Control SettingsPL IIx and Neo6 Settings PL IIx Music 2 ch only Neo6 MusicDolby Digital Settings Mono/Multiplex SettingsLFE Level Setting MultiplexDefault Listening Modes Listening Mode Preset menu AppearsUse the Up and Down Buttons to select 5. Listening Options for that input selector AppearAdvanced Setup Speaker SetupSpeaker Setup menu appears Speaker Config menu appearsAdvanced Setup Subwoofer ModeLow-Pass Filter for the LFE Channel LFE only THX The subwoofer only outputs the LFE channelSpeaker Distance Buttons to select Speaker DisTance, and then press Enter Repeat for all speakersSpeaker Level Calibration THX Audio Setup Setup menu closesButtons to specify the surround Back speaker spacingEqualizer Settings Repeat steps 6 and 7 for each speakerButtons to set the a. Use Set Tings option toInput Setup DelayUse the arrow Character EditThen press Enter Repeat to enter up to Characters Volume Setup IntelliVolumePreferences OSD Setup Hdmi Setup DTR-7.6 OnlyLock Setup OSD PositionRemote IDs Changing the Remote Controller’s IDChanging the AV Receiver’s Remote ID Digital Input Signal Formats Input, and then press Enter Use the Up and DownThat’s assigned to a digital input Opt, coax, or HDMI, and thenConnecting Zone Using Another Amp in ZoneUsing Only Speakers in Zone ZonePowered Zone 2 Setting Zone 2 Out SettingUsing Zone On the remote controller, press Zone 2 Remote Mode butTo adjust Ton, and then use the LevelUsing the 12V Triggers in Zone 2 and the Main Room Repeat this step as necessary for each settingDelay 12V Trigger Setting for Each Input SourceUsing a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components Entering Remote Control Codes Controlling Other ComponentsResetting the Remote Controller Remote Control Codes for Integra Components Connected viaResetting the Remote Mode Buttons Controlling Other ComponentsOn, Standby, TV CH +/-, TV CH +Prev CH TV InputLearning Commands from Other Remote Controllers Using Macros Making MacrosRunning Macros Deleting MacrosTroubleshooting Troubleshooting Remote controller doesn’t work Can’t learn commands from another remote controllerSound changes when I connect my head- phones Immediate display does not appearDTR-7.6,6.6.book Page 92 Monday, September 26, 2005 140 PM Specification Amplifier SectionVideo Section Tuner SectionMemo DTR-7.6,6.6.book Page 95 Monday, September 26, 2005 140 PM 3 4 4 0 8

DTR-7.6/6.6 specifications

The Integra DTR-7.6 and DTR-6.6 are high-performance AV receivers that cater to audiophiles and home theater enthusiasts alike. Both models are designed to deliver exceptional audio quality and advanced features, making them ideal for a wide range of entertainment needs.

One of the standout characteristics of the DTR-7.6 and DTR-6.6 is their ability to support advanced audio formats, including Dolby Atmos and DTS:X. This enables users to experience immersive soundscapes by harnessing overhead sound for a three-dimensional auditory experience. The receivers also feature multiple speaker configuration options, allowing you to set up a customized surround sound experience based on your room’s size and shape.

In terms of power output, the DTR-7.6 offers an impressive power rating, providing ample drive for even the most demanding speaker systems. The DTR-6.6, while having a slightly lower power output, still boasts sufficient capabilities for medium to large home theater setups. Both models incorporate high-current amplifiers, ensuring clean and dynamic performance across all frequencies.

The inclusion of advanced video processing technologies further enhances the viewing experience. With support for 4K UHD video and HDR formats such as HDR10, Dolby Vision, and HLG, users can expect stunning picture quality and vibrant color reproduction. The receivers come equipped with multiple HDMI inputs, enabling users to connect various devices such as gaming consoles, Blu-ray players, and streaming devices effortlessly.

Connectivity options on both the DTR-7.6 and DTR-6.6 are extensive, featuring built-in Wi-Fi and Bluetooth for easy streaming from smartphones and tablets. Additionally, the receivers support popular streaming services, making it simple to access a vast library of music and entertainment. For those who value a seamless setup process, both models also support automated calibration through Audyssey MultEQ, which fine-tunes your system based on the unique acoustics of your space.

The sleek design of both receivers ensures they will fit well within any entertainment setup. The front panel includes an easy-to-navigate interface with a clear display, remote control functionality, and compatibility with smart home systems. Overall, the DTR-7.6 and DTR-6.6 are powerful, feature-rich receivers that stand out in the crowded AV market, offering a combination of advanced technologies and audio performance suitable for both casual listeners and serious audiophiles.