Integra DTR-7.6/6.6 Presetting AM/FM Stations, XM Channels, Selecting Presets, Deleting Presets

DTR-7.6,6.6.book Page 52 Monday, September 26, 2005 1:40 PM

Listening to the Radio—Continued

Presetting AM/FM Stations and	Selecting Presets
XM Channels	1

2, 4 3

You can store a combination of up to 40 of your favorite AM/FM radio stations and XM channels as presets.

1	Tune into the AM/FM station or
	XM channel that you want to
	store as a preset.
2	Press the [Memory] button.
	The MEMORY indicator appears and
	the preset number flashes.

1

1	To select a preset, use the Preset
	[ ]/[ ] buttons, or the remote
	controller’s CH [+/–] button.

3

4

While the MEMORY indicator is displayed (about 8 seconds), use the Preset []/[ ] buttons to select a preset from 1 through 40.

Press the [Memory] button again to store the station or channel.

The station or channel is stored and the preset number stops flashing.

Repeat this procedure for all of your favorite AM/FM radio stations and XM channels.

Deleting Presets

2

1	Select the preset that you want to
	delete.
2	See the previous section.
	While holding down the [Mem-
	ory] button, press the
	[Tuning Mode] button.
	The preset is deleted and its number
	disappears from the display.

52