Integra DTR-7.6/6.6 Speaker Distance, Buttons to select Speaker Dis, Tance, and then press Enter

DTR-7.6,6.6.book Page 68 Monday, September 26, 2005 1:40 PM

Advanced Setup—Continued

Speaker Distance

These settings are set automatically by the Automatic Speaker Setup function (see page 38).

With these settings, you can specify the distance from each speaker to the listening position.

1	Press the [Receiver] Remote
	Mode button, followed by the
	[Setup] button.
	The main menu appears onscreen.

2 Use the Up and Down []/[ ] buttons to select “3. Speaker Setup,” and then press [Enter]. The Speaker Setup menu appears.

4

5

Use the Up and Down [ ]/[ ] buttons to select “a. Unit,” and then use the Left and Right

[]/[ ] buttons to select:

feet: Select if you want to enter distances in feet. Can be set from 1 to 30 feet in 0.5-foot steps.

meters: Select if you want to enter distances in meters. Can be set from 0.3 to 9 meters in 0.15-meter steps.

Use the Up and Down [ ]/[ ] buttons to select each speaker and then use the Left and Right []/[ ] buttons to specify the distance.

Specify the distance from the speaker to your listening position.

3	Use the Up and Down [ ]/[ ]
	buttons to select “Speaker Dis-
	tance,” and then press [Enter].
	The Speaker Distance menu appears.
	3-3.Speaker Distance
	------------------------
	a.Unit	:feet
	b.Left	:12.0ft
	c.Center	:12.0ft
	d.Right	:12.0ft
	e.Surround R	: 7.0ft
	f.SurrBack R	: 7.0ft
	g.SurrBack L	: 7.0ft
	h.Surround L	: 7.0ft
	i.Subwoofer	:12.0ft

Note:

Speakers that you set to No or None on the Speaker Config menu (page 66) cannot be selected.

6	Repeat step 5 for all speakers.
7	Press the [Setup] button.
	Setup closes.

Note:

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

68