Integra DTR-7.6/6.6 instruction manual Character Edit, Use the arrow

DTR-7.6,6.6.book Page 73 Monday, September 26, 2005 1:40 PM

Advanced Setup—Continued

Character Edit

With this setting, you can enter a custom name for each input source. When the input source is selected, its name will appear on the display.

1	Press the [Receiver] Remote
	Mode button, followed by the
	[Setup] button.
	The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select “4. Input Setup,”
	and then press [Enter].
	The Input Setup menu appears.
	4.Input Setup
	---------VIDEO1---------
	1.Delay
	2.Character Edit

3	Use the Up and Down [	]/[	]
	buttons to select “Character
	Edit,” and then press [Enter].
	The Character Edit menu appears.
	4-2.Character Edit
	---------VIDEO1---------
	a.Character Display
	:Yes
	b.Character
	:
	Press to Edit
	to Clear
4	Use the Up and Down [	]/[	]

buttons to select “Character Dis- play,” and use the Left and Right []/[ ] buttons to select:

No (Default): The default name is displayed.

Yes: The custom name is displayed.

This setting determines if the default name or the custom name you enter is displayed when the input source is selected.

5	Press the Down [	] button to
	select “Character,” and then
	press the Right [	] button to
	open the character input screen.
	4-2.Character Edit
	---------VIDEO1---------
	b.Character
	:	---+
	ABCDEFGHIJKLM
	NOPQRSTUVWXYZ
	abcdefghijklm
	nopqrstuvwxyz
	0123456789-.'
	()+*/=,:;!?_
		[Exit]
	+-------------+
6	Use the arrow [	]/[ ]/[ ]/[ ]
	buttons to select a character, and

then press [Enter].

7	Repeat step 6 to enter up to 10
	characters.
	If you enter a character by mistake:
	Press the [Return] button to move the
	cursor back one place.

To correct a character:

1.Press the [Enter] or [Return] button repeatedly to select the character to be corrected.

2. Use the Left and Right []/[ ] buttons to select the new character, and then press [Enter].

If the name contains less than 10 char- acters, select “Exit,” and then press [Enter].

8	Press the [Setup] button.
	Setup closes.

To delete all the characters in a name:

In step 5, press the Left [] button instead of the Right [ ] button.

Notes:

•When the multichannel input is selected, the same name as for DVD is displayed.

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

73