Windsor SGJ32, 10052530 operating instructions To Charge Batteries, LOW Battery SHUT-DOWN

Page 26

MAINTENANCE

TO CHARGE BATTERIES

When servicing machine, avoid contact with

! acid.

Batteries emit hydrogen gas. Explosion or fire

! can result. Keep sparks and open flame away.

Keep covers open when charging.

Wear eye protection and protective clothing ! when working with

batteries.

Charge batteries in a well ventilated area.

! 1. Stop the machine in a clean, well ventilated area next to the charger.

2.Turn the machine off and set parking brake.

FOR SAFETY: Before leaving or servicing machine, stop on level surface, apply parking brake, turn off machine and remove key.

3.Raise the seat and raise the support arm to lock in place.

Batteries emit hydrogen gas. Explosion or fire can result. Keep sparks and open flame away.

!

Keep covers open when

charging.

4.Check the electrolyte level in each battery cell. Before charging, add just enough water to cover up the plates. After recharging has completed, add just enough water to bring up the level to the indicator ring. If water level is to high before charging, normal expansion of the electrolytes may cause and overflow, resulting in loss of battery acid balance and damage to the machine.

5.Replace battery caps, and leave them in place while charging.

6.Unplug the battery connector from the machine. Unplug the battery charger from power outlet.

FOR SAFETY: When charging, connect the charger to the batteries before connecting the charger to the AC wall outlet. Never connect the charger to the AC first. Hazardous sparks may result.

7.Use a 36 volt DC charger which will automatically shut off when the batteries are fully charged to charge the six battery pack.

8.Plug the charger into the battery connector. Plug battery charger into power outlet. The charger gauge should indicate that the batteries are charging. If the charger does not automatically start up, verify that charger is plugged into batteries.

9.When the batteries are fully charged, disconnect the charger from the batteries.

10.Connect the batteries to the machine connector.

11.Check the electrolyte level. It should be up to the indicator ring. If necessary, add distilled water.

12.Lower the seat.

LOW BATTERY SHUT-DOWN

The electronic system is equipped with battery voltage sensors. When the batteries are exhausted to a preset level, the scrubbing system will shut down to protect the batteries from damage, and the battery lockout icon will appear on the display.

4-3

SGJ32 86037680 01/03/07

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Scrubber Overview Machine Data LOG/OVERVIEWYour Dealer Table of Contents HOW to USE this Manual Parts ListImportant Safety Instructions Read ALL Instructions Before Using this MachineHazard Intensity Level Hazard Intensity LevelSafety Label Location Technical Specifications DIMENSION/CAPACITYSpecial Notes MeasureHOW the Machine Works Components Controls KEY Switch Emergency Stop ButtonONE Touch Switch Brush Pressure SwitchSolution Control Switch VACUUM/SQUEEGEE SwitchDisplay Toggle Switch Information Display -SCREENControls Headlight Switch Optional Recycle Switch OptionalRecycle Indicator Light Optional Brake Pedal Directional Control Pedal and Speed Reduction FeatureSpeed Reduction Feature Parking Brake LeverSqueegee Defection Adjustment Knob Seat Adjustment Grab BARSqueegee Camber Adjustment Knob Side Squeegee Defection Adjustment KnobStarting Machine Machine OperationPRE-RUN Machine Inspection Filling the MachineTo Stop Scrubbing Emergency Stop ProcedureTo Begin Scrubbing Double ScrubEmptying and Cleaning Tanks Recovery Tank Solution TankMaintenance Battery Maintenance BatteriesLOW Battery SHUT-DOWN To Charge BatteriesTo Remove Batteries To Replace BatteriesSqueegee Adjustment To Adjust Squeegee PitchTo Replace or Rotate Front Squeegee Blades To Remove Squeegee AssemblyTo Replace or Rotate Rear Squeegee Blades To Replace or Rotate Side Squeegee Blades Side Squeegee AdjustmentAdjusting the Side Squeegee Deflection Uncoated Floors Replacing or Installing Scrub BrushesScrub Brushes Finished FloorsBrake Adjustment Float SwitchSolution Strainer Steering Chain Tensioner AdjustmentVacuum Motor Changing Vacuum MotorChanging Brush Motors Brush Motor Carbon Brush ReplacementBrush Motor Fuse Traction MotorTraction Motor Carbon Brush Replacment Circuit BreakersSqueegee Actuator REMOVAL/REPLACEMENT Squeegee Actuator AdjustmentScrub Deck Actuator REMOVAL/REPLACEMENT Scrub Deck Actuator AdjustmentMachine TIE-DOWNS Transporting MachineTowing or Pushing Machine Preparation for TransportingTo Jack UP Machine Jacking MachineMachine Jacking Machine StorageAfter Each Work Period Maintenance Service ScheduleMaintenance Before Each Work Period HRSSolution Machine TroubleshootingProblem Cause Error Code Problem Cause Solution

10052530, SGJ32 specifications

The Windsor SGJ32, model 10052530, is a highly sophisticated and versatile industrial sewing machine engineered for optimal performance in various textile applications. Designed for heavy-duty usage, this model stands out due to its robust construction and innovative technologies that cater to the needs of modern manufacturing environments.

One of the defining features of the SGJ32 is its advanced stitching capabilities. The machine is equipped with a high-speed motor that enables it to achieve impressive stitching rates, allowing users to maximize productivity. It can seamlessly handle a wide range of fabrics, from lightweight materials to heavy-duty textiles, making it an ideal choice for diverse sewing applications, including upholstery, outdoor gear, and garment production.

In terms of technology, the SGJ32 integrates computer numerical control (CNC) systems that enhance precision and repeatability in stitching. This technology allows for intricate designs and patterns to be produced with high accuracy, reducing the margin for error and ensuring consistent quality across batches. Additionally, the machine features a user-friendly interface with touch controls, making it easier for operators to adjust settings quickly and efficiently.

Another notable characteristic of the Windsor SGJ32 is its adaptability. The machine can be easily customized with various attachments and accessories, empowering users to tackle specific tasks and improve workflow. Its adjustable stitch length and width provide further versatility, enabling operators to switch between different sewing techniques without hassle.

The construction of the SGJ32 is another key aspect that contributes to its reliability. Built from high-quality materials, the machine is designed to withstand the rigors of continuous operation while minimizing wear and tear. This durability not only extends the lifespan of the equipment but also ensures lower maintenance costs over time.

Moreover, the SGJ32 incorporates safety features such as automatic needle positioning and a thread trimmer, which enhance operational safety and ease of use. These features reduce the risk of accidents and streamline the sewing process, allowing operators to focus on their craft without unnecessary distractions.

In conclusion, the Windsor SGJ32, model 10052530, is a powerful, versatile, and technologically advanced sewing machine that caters to a wide range of industrial applications. With its high-speed capabilities, precision control, adaptability, and robust construction, it is an essential tool for manufacturers seeking to improve efficiency and maintain quality in their production processes.
Top Page Image Contents