Windsor SGJ32, 10052530 Maintenance Service Schedule, Maintenance Before Each Work Period, Hrs

MAINTENANCE

SERVICE SCHEDULE

MAINTENANCE	BEFORE EACH
	WORK PERIOD
Check water level of batteries after charging;	*
add distilled water if necessary
Check that recovery tank cover seals tightly	*
Visually check for damaged or worn tires	*
Check brushes or pads for proper installation	*
Check vacuum hose connections	*
Check that squeegee is securely attached	*
and properly adjusted
Check that side squeegees are properly	*
adjusted
Check for securely attached drain hose, plug	*
and caps
Check brakes and steering for proper	*
operation
Inspect vacuum filter for debris
Clean out solution tank and filter, check flow
Run vacuum motors to dry
Clean brushes or pads and check wear
Clean main and side squeegee blades and
check wear
Clean out recovery tank and vacuum filter
Clean and inspect float shutoff
Clean outside of tanks, check for damage
Store with covers off tanks
Charge batteries
Check side squeegee for wear
Clean off top of batteries
Check battery cells with hydrometer
Inspect scrub deck skirts
Clean solution strainers
Check battery connections are tight
Clean battery cases and battery
compartment
Check parking brake adjustment
Check brakes discs and calipers for damage
or wear
Clean pivot points on squeegee and scrub
deck
Check all motors for carbon brush wear
Check motor commutators
Check steering chain tensioner

AFTER EACH

WORK PERIOD

*

*

*

*

*

*

*

*

*

*

50	100	200
HRS	HRS	HRS

*

*

*

*

*

*

*

*

*

*

*

*

*

NOTE: Traction drive, wheels and batteries should be serviced based on traction drive hour meter. The scrub brush hour meter should be used for all other service schedule items.

4-17 SGJ32 86037680 01/03/07