Wayne-Dalton 9600, 9400, 9100 Trolley Operator, Header Door ARM to Operator Bracket

Page 32

Trolley Operator

 

 

Tools Needed:

WARNING

 

 

 

OPERATOR MUST BE TESTED

AT TIME OF INSTALLATION AND

MONTHLY THEREAFTER TO

ENSURE THAT DOOR REVERSES

ON CONTACT WITH 2 X 4 BOARD

LAID FLAT UNDER THE DOOR.

FAILURE TO ADJUST OPERATOR,

IF NECESSARY, CAN RESULT IN

SEVERE OR FATAL INJURY. IF

YOUR OPERATOR IS EQUIPPED

WITH A PHOTOELECTRIC EYE

SYSTEM, THEN THIS MUST

BE TESTED AT THE SAME

TIME TO ENSURE THAT DOOR

DOES NOT CLOSE AND A

CLOSING DOOR OPENS IF

PHOTOELECTRIC EYE SYSTEM IS

OBSTRUCTED. FAILURE TO MAKE

ADJUSTMENTS, IF NECESSARY,

CAN RESULT IN SEVERE OR FATAL

INJURY.

1.Install operator rail 1/2” to 1-1/2” (13 - 38 mm) above high arc of top section of the door.

2.Mount operator to ceiling so that 1” to 1-1/2” (25 - 38 mm) clearance is maintained between trolley rail and top section when door is fully open (trolley rail will slope down towards rear).

3.Attach door arm to operator bracket installed in Step 10.

4.Attach operator rail to suitable mounting surface, 2 x 6 lumber minimum.

5.Attach operator to ceiling using perforated angle.

IMPORTANT: Angles must be securely attached to sound framing member(s).

SUITABLE MOUNTING

OPERATOR RAIL

SURFACE 2 X 6

 

LUMBER MINIMUM

 

HEADER

DOOR ARM TO OPERATOR BRACKET

perforated

OPERATORangle rail

OPERATOR

FRAMING MEMBERS

PERFORATED ANGLE

32

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Page 31 Page 33
Image 32
Page 31 Page 33
Contents 9100, 9400 Portland Source PlantTable of Contents Package Contents Door Section Identification Tools Required LevelSpring when the set screws are Torsion Spring Removal For Standard LiftFailure to use approved Experienced door technician. Instead haveTorqueMaster Spring Removal Unwind SpringsBracket and Drive Gear Extension Spring Removal Removing the Old DoorPreparing the Opening Failure toSecurely attach a Suitable mounting pad to structurallyInstallation Attaching Fully AdjustableFlagangle to Vertical Track Hand tighten the flagangle toInstalling Q.I. Jamb Brackets Hole Middle Bottom Quick install featureMeasure the length of the vertical Left side shownDrums Bottom SectionVertical Track Stacking Sections Top Brackets Bar Bar AsymmetricalOperator Bracket Important When Installing aAdjusted Properly Top Section Door OperationDo not Raise Door Until Horizontal Adjusting Top BracketsFlagangle Torsion End Bearing Brackets Center Bearing BracketTorsion Spring Assembly SideNylon Center Bushing Counterbalance Cables Securing DoorFor Spring Winding Important do not USE Impact GUN To Wind SpringsWinding Torsion Springs Rear Support Keep horizontal trackParallel and within 3/4 Maximum of door edgeTo adjust spring tension, fully close Third roller. Insert a winding bar intoWinding bar while carefully loosening Set screws in the winding coneSide Lock Pull RopeStep Plate Trolley Installation for Standard LiftFailure to use locking nut can result Arm releasing and possible resultingLow Headroom Determine center line of door. Mark vertical line at thisPoint, on the header wall. Raise the door slightly until Top section reaches the highest point of travel high arcTrolley Operator Header Door ARM to Operator BracketPerforated OPERATORangle rail Operator Framing Members Perforated AngleCleaning Glass Cleaning InstructionsAcrylic Cleaning Instructions PaintingPainting Lifetime Limited Warranty Models 9100, 9400 Thank you for your purchase
Related manuals
Manual 8 pages 50.32 Kb Manual 10 pages 39.36 Kb Manual 8 pages 41.15 Kb Manual 40 pages 4.99 Kb Manual 40 pages 42.94 Kb Manual 2 pages 9.98 Kb Manual 9 pages 37.96 Kb Manual 48 pages 56.14 Kb

9600, 9100, 9400 specifications

Wayne-Dalton is a renowned name in the garage door industry, and its series of garage doors, namely the 9600, 9400, and 9100, stand out for their exceptional quality, durability, and aesthetic appeal. Each series is designed to meet various needs, offering a range of features and technologies that enhance functionality and performance.

The Wayne-Dalton 9600 series is known for its energy efficiency and robust construction. These doors are insulated with a foamed-in-place polyurethane core, which provides an exceptional R-value, making them ideal for regions with extreme temperature fluctuations. The 9600 series features high-quality steel construction, ensuring durability and resistance to dents and damage. This series also offers a variety of design options, including wood grain textures and multiple color finishes, allowing homeowners to match their garage doors with their home’s exterior.

Moving to the Wayne-Dalton 9400 series, this line is recognized for its versatility and premium insulation. Like the 9600 series, the 9400 features a polyurethane core foamed between two layers of steel for superior thermal performance. Moreover, it offers a wider selection of panel designs, from traditional to contemporary finishes. The 9400 doors come equipped with a weather seal, enhancing protection against the elements and keeping the garage environment comfortable year-round.

Lastly, the Wayne-Dalton 9100 series combines affordability with functionality. It also offers insulated construction, although with a polystyrene core, making it an excellent choice for homeowners seeking a budget-friendly option without sacrificing quality. The 9100 series provides a good range of design options and customizable accessories such as decorative hardware, windows, and color choices to suit individual preferences.

All three series benefit from advanced technology, such as Wayne-Dalton's innovative design features for smooth operation and increased safety. They are equipped with sectional door designs, reducing the risk of pinch points and enhancing user safety. Additionally, Wayne-Dalton offers a variety of remote access and control technologies, ensuring convenience and peace of mind for users.

In summary, the Wayne-Dalton 9600, 9400, and 9100 series are distinguished by their superior insulation, durability, and stylish design options. Whether prioritizing energy efficiency, versatility, or budget considerations, these garage doors cater to a spectrum of consumer needs, thereby continuing Wayne-Dalton's legacy of excellence in design and functionality.
Top Page Image Contents