ION DSP-AX750SE owner manual RX-V750 Europe model only, Video AUX jacks, Phones Silent Cinema jack

Page 7

8TUNING MODE (AUTO/MAN’L MONO) (RX-V750)

Switches the tuning mode between automatic (AUTO indicator on) and manual (AUTO indicator off).

9VIDEO AUX jacks

Input audio and video signals from a portable external source such as a game console. To reproduce source signals from these jacks, select V-AUX as the input source.

0VOLUME

Controls the output level of all audio channels. This does not affect the REC OUT level.

A PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the OUTPUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

BSPEAKERS A/B

Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

CPRESET/TUNING (EDIT) (RX-V750)

Switches the function of PRESET/TUNING l / h (LEVEL –/+) between selecting preset station numbers and tuning.

DSTRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

EFM/AM (RX-V750)

Switches the reception band between FM and AM.

FPROGRAM

Use to select sound field programs or adjust the bass/treble balance (in conjunction with TONE CONTROL).

GTONE CONTROL

Use to adjust the bass/treble balance for the front left and right, center, presence and subwoofer channels (see page 32).

CONTROLS AND FUNCTIONS

HINPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of signals received when one component is connected to two or more of this unit’s input jacks (see page 37).

IINPUT selector

Selects the input source you want to listen to or watch.

JMULTI CH INPUT

Selects the source connected to the MULTI CH INPUT jacks. When selected, the MULTI CH INPUT source takes priority over the source selected with INPUT (or the input selector buttons on the remote control).

KPURE DIRECT

Turns on or off PURE DIRECT mode (see page 36).

■RX-V750 Europe model only

LRDS MODE/FREQ

Press this button when the unit is receiving an RDS station to cycle the display between the PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data services) and/or the frequency display.

MPTY SEEK MODE

Press this button to set the unit to the PTY SEEK mode.

NPTY SEEK START

Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.

OEON

Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically.

INTRODUCTION

English

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DSP-AX750SE AV Amplifier Special Instructions for U.K. Model For U.K. customersContents Other features FeaturesBuilt-in 7-channel power amplifier Sound field featuresPlease check that you received all of the following parts Supplied accessoriesInstalling batteries in the remote control Getting StartedFront panel Controls and FunctionsFM/AM RX-V750 RX-V750 Europe model onlyVideo AUX jacks Phones Silent Cinema jackRemote control Select k/n RDS tuning buttonsVOL -/+ Handling the remote control Using the remote controlFront panel display Input channel indicators Optimizer indicator96/24 indicator LFE indicatorRear panel Speaker placement Speaker Setup10 mm Connecting to Presence speaker terminalsTighten the knob to secure the wire Speaker connectionsRight Left Surround back Speakers Front speakers a Subwoofer System Presence speakersRight Left RX-V750 Right Left FrontSUB Woofer jack Front terminalsCenter terminals Surround terminalsDigital jacks ConnectionsCable indications Analog jacksMonitor Connecting video componentsConnections for DVD playback DVD playerFor 6-channel input RX-V750 Connecting to the Multi CH Input jacksFor 8-channel input RX-V750 Video AUX jacks on the front panel Connections for other video componentsUse these jacks to connect any video source, such as a Connections for audio components Connecting audio componentsConnecting a turntable Connecting a tunerConnecting to an external amplifier Ground GND terminal Connecting the AM loop antennaFrequency Step switch Asia and General models only Indoor FM antenna Included AM loop antenna includedConnecting the AC power cord Connecting the power supply cordMemory back-up Impedance Selector switch Impedance Selector switchFront panel Turning on the powerTurn on the video monitor connected to this unit RX-V750 U.S.A. modelOptimizer microphone position Auto SetupOptimizer microphone setup IntroductionResultwiring Starting the setupAutomenu Resultexit ErrorError E-5 If an error screen appearsPress u / d to select Result LIST, then press Select When you are finished, press SelectResultwiring screen appears If a warning screen appearsBefore auto setup Troubleshooting for auto setup procedureErrors during auto setup Start playback or select a broadcast station Adjust the volume to the desired output levelPlayback Select the input sourceSelect a sound field program if desired To listen with headphones Silent CinemaTo adjust the tone Press Mute on the remote control Mute indicator blinksFront panel operation Selecting sound field programsMulti CH Input Selecting Multi CH InputPLIIxMusic Remote control operationEnjoying multi-channel software Decoders select with jPRO Logic SUR. Enhanced Press q/DTS on the remote control to select the decoderEnjoying 2-channel software PRO Logic SUR. StandardPress Pure Direct to activate pure direct To cancel, press Pure Direct againListening to high fidelity stereo sound Night listening modesDownmixing to 2 channels Listening to unprocessed input signalsSelecting input modes StraightPress u / d to display the following Information about the input signalDisplaying information about the input SourceAutomatic and manual tuning Tuning RX-V750Automatic tuning Press FM/AM to select the FM band Presetting stationsManual tuning Automatically presetting FM stationsManually presetting stations Automatic preset tuning optionsPress A/B/C/D/E to select the preset station group Selecting preset stationsWhen performing this operation with the remote Control, first press Tuner to set the remote to tuner modeSee Selecting preset stations Press PRESET/TUNING Edit againCT Clock Time mode PS Program Service name modePTY Program Type mode RT Radio Text modePTY Seek function To cancel this functionPress PTY Seek Mode to set this unit PTY Seek modeEON function Recording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsSUR. Standard Dolby DigitalSUR. Standard Dolby Digital SUR. EnhancedSUR. Standard PRO Logic PRO LogicRock Concert For music sourcesConcert Hall Jazz ClubP08 Movie Theater Selecting the OSD mode Using the sleep timerSetting the sleep timer Advanced OperationsSleep OFF Canceling the sleep timerPress j / i to adjust the speaker output level Press Select when you have completed your adjustmentOutputting the test tone from the Presence speakers Using the test tonePress AMP Press Test SET Menu To exit, press SET Menu when finished Using SET MenuPress u / d to select Manual Setup Press Select to enter Manual SetupSurr L/R SP Sound Menu 1/2Center SP Front SPCross Over Surr B L/R SPPresence SP LFE/BASS OUTCSP Distance 02ASUBWOOFER PhaseSpeaker distance CSP Distance Gaudio SET Dcenter GEQElfe Level Fdynamic RangeOptical OUT HPR/SB SelectInput Menu CMPNT-V InputFor Coaxial Input jacks 5 Binput ModeCoaxial Cinput RenameAdisplay SET Option MENU1/2Bmemory Guard Speaker B set SP B CPARAM. INIDzone SET Parameter initialization CPARAM. INIControlling this unit Remote Control FeaturesControl area Advd DVDManufacturer Setting manufacturer codesPress Learn again to exit from the setup mode MD/CD Controlling other componentsLearn is displayed Programming codes from other remote controlsPress Learn using a ballpoint pen or similar object Press an input selector button to select a source componentChanging source names in the display window Clearing function sets Press Clear by using a ballpoint pen or similar objectPress u / d to select the clear mode Press Clear to exit from the clearing modeClearing a learned function Clearing individual functionsSelected component name appears in the display window Editing Sound Field Parameters What is a sound field Changing parameter settingsElements of a sound field Press u / d to select the parameters Resetting parameters to the factory presetsTo reset a certain parameter To reset all parametersSound Field Parameter Descriptions INIT. DLY Initial delayRoom SIZE/P. Room Size Room size Liveness Surround liveness INIT. DLY Surround initial delaySB INIT. DLY Surround back initial delay Room Size Surround room sizeREV.TIME Reverberation time REV.DELAY Reverberation delayREV. Level Reverberation level For DTS Neo6 Music Image Center image DIALG.LIFT Dialog liftFor 7ch Stereo CT Width Center widthGeneral TroubleshootingOne side can be Sound suddenlyGoes off Only the speaker onDolby Digital or DTS Or DTS indicator onVolume level is Record Volume levelTuner RX-V750 Does not learn new Remote controlDoes not work nor Function properlyPress Straight Effect to select the desired setting Resetting the Factory PresetsBe sure this unit is in standby mode Factory Preset appears in the front panel displayAudio formats GlossaryPCM Linear PCM Sound field programsAudio information LFE 0.1 channelVideo signal Video signal informationComponent video signal Composite video signalAudio Section SpecificationsWC85520
Top Page Image Contents