ION RX-V750 Displaying information about the input, Source, Press u / d to display the following

PLAYBACK

Notes

3 Press u / d to display the following

• When you play DTS-encoded CD/LDs with the input mode set					information about the input signal.
	to AUTO:
	– This unit automatically switches to the DTS decoding mode.						+
	The unit remains in DTS mode (and the t indicator may
							TV VOL
	flash) for up to 30 seconds after playback of the DTS source is
	complete. To manually release the DTS mode, press INPUT					CH	TV MUTE	CH
						–		+
	MODE to reselect AUTO.						SELECT
						PRESET		PRESET
	– The DTS decoding mode may be released if search or skip						TV VOL
	operations are performed for more than 30 seconds. To						–
	prevent this, press INPUT MODE to select DTS.
• If the digital output data of the player has been processed in any					(Format)	Signal format display. When the unit
	way, you may not be able to perform DTS decoding even if you
						cannot detect a digital signal it
	make a digital connection between this unit and the player.
						automatically switches to analog input.
Displaying information about the input
					in	Number of source channels in the input
source						signal. For example, a multi-channel
You can display the type, format and sampling frequency						soundtrack with 3 front channels, 2
of the current input signal.						surround channels and LFE, is
						displayed as “3/2/LFE”.
	1 Select the input source.				fs	Sampling frequency. When the unit is
						unable to detect the sampling
	A	B	PHONO	MULTI CH IN		frequency “Unknown” appears.
	V-AUX	TUNER	MD/CD-R	CD	rate	Bit rate. When the unit is unable to
						detect the bit rate “Unknown” appears.
	DTV/CBL	VCR 1	DVR/VCR2	DVD	flg	Flag data encoded with DTS or Dolby

Digital signals that cue this unit to automatically switch decoders.

2Press AMP to select the AMP mode, then press STRAIGHT (EFFECT) so that “STRAIGHT” appears in the display.

AMP STRAIGHT

then

EFFECT

STRAIGHT

38