Clearing function sets
You can clear all changes made in each function set, such as learned functions, renamed source names and setup manufacturer codes.
1Press CLEAR by using a ballpoint pen or similar object.
CLEAR
y
Complete each of the following steps in 30 seconds. Other wise, the learning mode will be automatically canceled. In this case, press CLEAR again.
2Press u / d to select the clear mode.
L:DVD (L: name of a component)
Clears all learned functions in the respective component control area. Press an input selector button to select the component.
L:AMP Clears all learned functions for this unit’s control area.
L:ALL Clears all learned functions. RNAME Clears all renamed source names.
FCTRY Clears all remote functions and returns the remote to the factory settings.
3Press and hold CLEAR again for about 3 seconds.
“C:OK” appears in the display window.
REMOTE CONTROL FEATURES
4Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function for a button, the button reverts to the factory preset setting.
CLEAR
Note
“ERROR” appears in the display window under the following circumstances:
–When a button other than the cursor is pressed.
–When more than one button is pressed at the same time.
CLEAR
Note
“C:NG” appears in the display window if the operation is unsuccessful. In this case, start over from step 2.
OPERATION | ADVANCED |
|
|
English
71