ION RX-V750, DSP-AX750SE owner manual Specifications, Audio Section

Page 90

SPECIFICATIONS

AUDIO SECTION

Minimum RMS Output Power for Front, Center, Surround, Surround back

20 Hz to 20 kHz, 0.06% THD, 8

 

100 W

• Maximum Power (EIAJ)

 

 

 

[China, Korea and General models]

 

 

 

1 kHz, 10% THD, 8

 

140 W

• Dynamic Power (IHF)

 

 

 

8/6/4/2

135/170/200/245 W

• DIN Standard Output Power [U.K., Europe and Asia models]

1 kHz, 0.7% THD, 4

 

150 W

• IEC Output Power [U.K., Europe and Asia models]

 

 

1 kHz, 0.06% THD, 8

 

110 W

• Damping Factor (IHF)

 

 

 

20 Hz to 20 kHz, 8

 

100 or more

• Frequency Response

 

 

 

CD terminal to Front L/R

10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

 

 

 

PHONO to REC OUT (20 Hz to 20 kHz, 1 V)

0.02%

CD, etc. to Front L/R (20 Hz to 20 kHz, 50 W, 8 Ω)

........... 0.06%

• Signal to Noise Ratio (IHF-A Network)

 

 

 

Phono (5 mV) to REC OUT

 

 

 

[U.K., Europe, Australia and Asia models]

81 dB

[Other models]

 

86 dB

CD (250 mV) to Front L/R, Effect Off

 

100 dB

• Residual Noise (IHF-A Network)

 

 

 

Front L/R

150 µV or less

• Channel Separation (1 kHz/10 kHz)

 

 

 

PHONO (shorted) to Front L/R

 

60 dB/55 dB

CD (5.1 kterminated) to Front L/R

 

60 dB/45 dB

• Tone Control (Front L/R)

 

 

 

BASS Boost/Cut

 

±6 dB/50 Hz

BASS Turnover Frequency

 

350 Hz

TREBLE Boost/Cut

 

±6 dB/20 kHz

TREBLE Turnover Frequency

 

3.5 kHz

• Phones Output

150 mV/100

• Input Sensitivity/Input Impedance

 

 

2.5 mV/47 k

PHONO

 

CD, etc

200 mV/47 k

MULTI CH INPUT

200 mV/47 k

• Output Level/Output Impedance

 

200 mV/1.2 k

REC OUT

PRE OUT

 

2 V/1.2 k

SUB WOOFER

 

4 V/1.7 k

VIDEO SECTION

• Video Signal Type

PAL/NTSC

• Signal to Noise Ratio

50 dB

• Frequency Response (MONITOR OUT)

 

Composite, S-Video

5 Hz to 10 MHz, –3 dB

Component

5 Hz to 60 MHz, –3 dB

FM SECTION (RX-V750)

• Tuning Range

 

[U.S.A. and Canada models]

........................... 87.5 to 107.9 MHz

[Asia and General model]

87.5/87.50 to 108.0/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• Usable Sensitivity (IHF)

1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

76 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.2%/0.3%

• Stereo Separation (1 kHz)

42 dB

• Frequency Response

20 Hz to 15 kHz, +0.5, –2 dB

AM SECTION (RX-V750)

• Tuning Range

 

[U.S.A. and Canada models]

............................... 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

• Usable Sensitivity

300 µV/m

GENERAL

• Power Supply

 

 

[U.S.A. and Canada models]

AC 120 V, 60 Hz

[Australia model]

AC 240 V, 50 Hz

[China model]

AC 220 V, 50 Hz

[Korea model]

AC 220 V, 60 Hz

[U.K. and Europe models]

AC 230 V, 50 Hz

[General model]

AC 110/120/220/230-240 V, 50/60 Hz

[Asia model]

AC 220/230-240 V, 50/60 Hz

• Power Consumption

 

 

[U.S.A. and Canada models]

400 W/500 VA

[Other models]

440 W

• Standby Power Consumption

..................................................

0.1 W

• AC Outlets

 

 

[U.K. and Australia models]

1 (Total 100 W maximum)

[China, Asia and General models]

2 (Total 50 W maximum)

[Other models]

2 (Total 100 W maximum)

• Dimension (W x H x D)

435 x 171 x 420 mm

• Weight

12.5 kg

88

Image 90
Contents DSP-AX750SE AV Amplifier For U.K. customers Special Instructions for U.K. ModelContents Sound field features FeaturesBuilt-in 7-channel power amplifier Other featuresGetting Started Supplied accessoriesInstalling batteries in the remote control Please check that you received all of the following partsControls and Functions Front panelPhones Silent Cinema jack RX-V750 Europe model onlyVideo AUX jacks FM/AM RX-V750Remote control RDS tuning buttons Select k/nVOL -/+ Using the remote control Handling the remote controlFront panel display LFE indicator Optimizer indicator96/24 indicator Input channel indicatorsRear panel Speaker Setup Speaker placementSpeaker connections Connecting to Presence speaker terminalsTighten the knob to secure the wire 10 mmRX-V750 Right Left Front Subwoofer System Presence speakersRight Left Right Left Surround back Speakers Front speakers aSurround terminals Front terminalsCenter terminals SUB Woofer jackAnalog jacks ConnectionsCable indications Digital jacksDVD player Connecting video componentsConnections for DVD playback MonitorConnecting to the Multi CH Input jacks For 6-channel input RX-V750For 8-channel input RX-V750 Connections for other video components Video AUX jacks on the front panelUse these jacks to connect any video source, such as a Connecting a tuner Connecting audio componentsConnecting a turntable Connections for audio componentsConnecting to an external amplifier Indoor FM antenna Included AM loop antenna included Connecting the AM loop antennaFrequency Step switch Asia and General models only Ground GND terminalConnecting the power supply cord Connecting the AC power cordMemory back-up Impedance Selector switch Impedance Selector switchRX-V750 U.S.A. model Turning on the powerTurn on the video monitor connected to this unit Front panelIntroduction Auto SetupOptimizer microphone setup Optimizer microphone positionStarting the setup ResultwiringAutomenu If an error screen appears ErrorError E-5 ResultexitIf a warning screen appears When you are finished, press SelectResultwiring screen appears Press u / d to select Result LIST, then press SelectTroubleshooting for auto setup procedure Before auto setupErrors during auto setup Select the input source Adjust the volume to the desired output levelPlayback Start playback or select a broadcast stationPress Mute on the remote control Mute indicator blinks To listen with headphones Silent CinemaTo adjust the tone Select a sound field program if desiredSelecting Multi CH Input Selecting sound field programsMulti CH Input Front panel operationDecoders select with j Remote control operationEnjoying multi-channel software PLIIxMusicPRO Logic SUR. Standard Press q/DTS on the remote control to select the decoderEnjoying 2-channel software PRO Logic SUR. EnhancedNight listening modes To cancel, press Pure Direct againListening to high fidelity stereo sound Press Pure Direct to activate pure directStraight Listening to unprocessed input signalsSelecting input modes Downmixing to 2 channelsSource Information about the input signalDisplaying information about the input Press u / d to display the followingTuning RX-V750 Automatic and manual tuningAutomatic tuning Automatically presetting FM stations Presetting stationsManual tuning Press FM/AM to select the FM bandAutomatic preset tuning options Manually presetting stationsControl, first press Tuner to set the remote to tuner mode Selecting preset stationsWhen performing this operation with the remote Press A/B/C/D/E to select the preset station groupPress PRESET/TUNING Edit again See Selecting preset stationsRT Radio Text mode PS Program Service name modePTY Program Type mode CT Clock Time modePTY Seek mode To cancel this functionPress PTY Seek Mode to set this unit PTY Seek functionEON function Special considerations when recording DTS software RecordingSound Field Program Descriptions For movie/video sourcesSUR. Enhanced Dolby DigitalSUR. Standard Dolby Digital SUR. StandardPRO Logic SUR. Standard PRO LogicJazz Club For music sourcesConcert Hall Rock ConcertAdvanced Operations Selecting the OSD mode Using the sleep timerSetting the sleep timer P08 Movie TheaterPress Select when you have completed your adjustment Canceling the sleep timerPress j / i to adjust the speaker output level Sleep OFFUsing the test tone Outputting the test tone from the Presence speakersPress AMP Press Test SET Menu Press Select to enter Manual Setup Using SET MenuPress u / d to select Manual Setup To exit, press SET Menu when finishedFront SP Sound Menu 1/2Center SP Surr L/R SPLFE/BASS OUT Surr B L/R SPPresence SP Cross Over02ASUBWOOFER Phase CSP DistanceSpeaker distance CSP Distance Fdynamic Range Dcenter GEQElfe Level Gaudio SETCMPNT-V Input HPR/SB SelectInput Menu Optical OUTCinput Rename Binput ModeCoaxial For Coaxial Input jacks 5Option MENU1/2 Adisplay SETBmemory Guard Parameter initialization CPARAM. INI CPARAM. INIDzone SET Speaker B set SP BAdvd DVD Remote Control FeaturesControl area Controlling this unitSetting manufacturer codes ManufacturerPress Learn again to exit from the setup mode Controlling other components MD/CDPress an input selector button to select a source component Programming codes from other remote controlsPress Learn using a ballpoint pen or similar object Learn is displayedChanging source names in the display window Press Clear to exit from the clearing mode Press Clear by using a ballpoint pen or similar objectPress u / d to select the clear mode Clearing function setsClearing individual functions Clearing a learned functionSelected component name appears in the display window What is a sound field Changing parameter settings Editing Sound Field ParametersElements of a sound field To reset all parameters Resetting parameters to the factory presetsTo reset a certain parameter Press u / d to select the parametersINIT. DLY Initial delay Sound Field Parameter DescriptionsRoom SIZE/P. Room Size Room size Room Size Surround room size INIT. DLY Surround initial delaySB INIT. DLY Surround back initial delay Liveness Surround livenessREV.DELAY Reverberation delay REV.TIME Reverberation timeREV. Level Reverberation level CT Width Center width DIALG.LIFT Dialog liftFor 7ch Stereo For DTS Neo6 Music Image Center imageTroubleshooting GeneralOnly the speaker on Sound suddenlyGoes off One side can beRecord Volume level Or DTS indicator onVolume level is Dolby Digital or DTSTuner RX-V750 Function properly Remote controlDoes not work nor Does not learn newFactory Preset appears in the front panel display Resetting the Factory PresetsBe sure this unit is in standby mode Press Straight Effect to select the desired settingGlossary Audio formatsLFE 0.1 channel Sound field programsAudio information PCM Linear PCMComposite video signal Video signal informationComponent video signal Video signalSpecifications Audio SectionWC85520