ION RX-V750, DSP-AX750SE owner manual Sound Field Program Descriptions, For movie/video sources

Page 50

SOUND FIELD PROGRAM DESCRIPTIONS

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multichannel playback from almost any sound source (stereo or multi-channel). This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience. Most of these sound field programs are precise digital recreations of actual acoustic environments found in famous concert halls, music venues, and movie theaters.

y

The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources. Set the input mode to AUTO (see page 37) to enable this unit to automatically switch to the appropriate digital decoder according to the input signal.

Notes

•This unit’s DSP sound field programs are recreations of real-world acoustic environments made from precise measurements taken in the actual hall, etc. Thus you may notice variations in the strength of the reflections coming from the front, back, left and right.

•Feel free to choose a sound field program based on your listening preference, and not purely on the name of the program itself.

For movie/video sources

You can select from the following sound fields when playing movie or video sources. The sound fields marked “MULTI” can be used with multi-channel sources, like DVD, digital TV, etc. Those marked “2-CH” can be used with 2-channel (stereo) sources like TV programs, video tapes, etc.

Program

Features

Sources

 

 

 

STEREO:

Downmixes multi-channel sources to 2 channel (left and right) or plays back 2-channel sources

 

2ch Stereo

as is.

 

 

 

 

 

 

MUSIC VIDEO

This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at

 

 

an actual jazz or rock concert.

 

 

 

 

ENTERTAINMENT:

This program adds a deep and spatial feeling to video game sounds.

 

Game

 

 

 

 

 

TV THEATER:

This program is provided for reproducing monaural video sources (such as old movies). The

 

Mono Movie

program produces the optimum reverberation to create sound depth using only the presernce

 

sound field.

 

 

 

 

 

 

TV THEATER:

Though the presence sound field is relatively narrow, the surround sound field employs the

 

Variety/Sports

sound environment of a large concert hall. This effect enhances the experience of watching

 

various TV programs such as news, variety shows, music programs or sports programs.

 

 

 

 

 

MULTI

MOVIE THEATER:

CINEMA DSP processing. This program creates the extremely wide sound field of a 70-mm

2-CH

Spectacle

movie theater. It precisely reproduces the source sound in detail, making both the video and the

 

sound field incredibly real. This is ideal for any kind of video source encoded with Dolby

 

 

 

 

Surround, Dolby Digital or DTS (especially large-scale movie productions).

 

 

 

 

MOVIE THEATER:

CINEMA DSP processing. This program clearly reproduces dialog and sound effects in the

 

Sci-Fi

latest sound form for science fiction films, thus creating a broad and expansive cinematic space

 

amid silence. You can enjoy science fiction films in a virtual-space sound field that includes

 

 

 

 

Dolby Surround, Dolby Digital and DTS-encoded software employing the most advanced

 

 

techniques.

 

 

 

 

MOVIE THEATER:

CINEMA DSP processing. This program is ideal for precisely reproducing the sound design of

 

Adventure

the newest 70-mm and multi-channel soundtrack films. The sound field is made to be similar to

 

that of the newest movie theaters, so the reverberations of the sound field itself are restrained

 

 

 

 

as much as possible.

 

 

 

 

MOVIE THEATER:

CINEMA DSP processing. This program is for reproducing sounds from 70-mm and multi-

 

General

channel soundtrack films, and is characterized by soft and extensive sound field.

 

 

 

 

 

 

48

Page 49 Page 51
Image 50
Page 49 Page 51
Contents DSP-AX750SE AV Amplifier For U.K. customers Special Instructions for U.K. ModelContents Sound field features FeaturesBuilt-in 7-channel power amplifier Other featuresGetting Started Supplied accessoriesInstalling batteries in the remote control Please check that you received all of the following partsControls and Functions Front panelPhones Silent Cinema jack RX-V750 Europe model onlyVideo AUX jacks FM/AM RX-V750Remote control VOL -/+ RDS tuning buttonsSelect k/n Using the remote control Handling the remote controlFront panel display LFE indicator Optimizer indicator96/24 indicator Input channel indicatorsRear panel Speaker Setup Speaker placementSpeaker connections Connecting to Presence speaker terminalsTighten the knob to secure the wire 10 mmRX-V750 Right Left Front Subwoofer System Presence speakersRight Left Right Left Surround back Speakers Front speakers aSurround terminals Front terminalsCenter terminals SUB Woofer jackAnalog jacks ConnectionsCable indications Digital jacksDVD player Connecting video componentsConnections for DVD playback MonitorFor 8-channel input RX-V750 Connecting to the Multi CH Input jacksFor 6-channel input RX-V750 Use these jacks to connect any video source, such as a Connections for other video componentsVideo AUX jacks on the front panel Connecting a tuner Connecting audio componentsConnecting a turntable Connections for audio componentsConnecting to an external amplifier Indoor FM antenna Included AM loop antenna included Connecting the AM loop antennaFrequency Step switch Asia and General models only Ground GND terminalMemory back-up Connecting the power supply cordConnecting the AC power cord Impedance Selector switch Impedance Selector switchRX-V750 U.S.A. model Turning on the powerTurn on the video monitor connected to this unit Front panelIntroduction Auto SetupOptimizer microphone setup Optimizer microphone positionAutomenu Starting the setupResultwiring If an error screen appears ErrorError E-5 ResultexitIf a warning screen appears When you are finished, press SelectResultwiring screen appears Press u / d to select Result LIST, then press SelectErrors during auto setup Troubleshooting for auto setup procedureBefore auto setup Select the input source Adjust the volume to the desired output levelPlayback Start playback or select a broadcast stationPress Mute on the remote control Mute indicator blinks To listen with headphones Silent CinemaTo adjust the tone Select a sound field program if desiredSelecting Multi CH Input Selecting sound field programsMulti CH Input Front panel operationDecoders select with j Remote control operationEnjoying multi-channel software PLIIxMusicPRO Logic SUR. Standard Press q/DTS on the remote control to select the decoderEnjoying 2-channel software PRO Logic SUR. EnhancedNight listening modes To cancel, press Pure Direct againListening to high fidelity stereo sound Press Pure Direct to activate pure directStraight Listening to unprocessed input signalsSelecting input modes Downmixing to 2 channelsSource Information about the input signalDisplaying information about the input Press u / d to display the followingAutomatic tuning Tuning RX-V750Automatic and manual tuning Automatically presetting FM stations Presetting stationsManual tuning Press FM/AM to select the FM bandAutomatic preset tuning options Manually presetting stationsControl, first press Tuner to set the remote to tuner mode Selecting preset stationsWhen performing this operation with the remote Press A/B/C/D/E to select the preset station groupPress PRESET/TUNING Edit again See Selecting preset stationsRT Radio Text mode PS Program Service name modePTY Program Type mode CT Clock Time modePTY Seek mode To cancel this functionPress PTY Seek Mode to set this unit PTY Seek functionEON function Special considerations when recording DTS software RecordingSound Field Program Descriptions For movie/video sourcesSUR. Enhanced Dolby DigitalSUR. Standard Dolby Digital SUR. StandardPRO Logic SUR. Standard PRO LogicJazz Club For music sourcesConcert Hall Rock ConcertAdvanced Operations Selecting the OSD mode Using the sleep timerSetting the sleep timer P08 Movie TheaterPress Select when you have completed your adjustment Canceling the sleep timerPress j / i to adjust the speaker output level Sleep OFFPress AMP Press Test Using the test toneOutputting the test tone from the Presence speakers SET Menu Press Select to enter Manual Setup Using SET MenuPress u / d to select Manual Setup To exit, press SET Menu when finishedFront SP Sound Menu 1/2Center SP Surr L/R SPLFE/BASS OUT Surr B L/R SPPresence SP Cross OverSpeaker distance CSP Distance 02ASUBWOOFER PhaseCSP Distance Fdynamic Range Dcenter GEQElfe Level Gaudio SETCMPNT-V Input HPR/SB SelectInput Menu Optical OUTCinput Rename Binput ModeCoaxial For Coaxial Input jacks 5Bmemory Guard Option MENU1/2Adisplay SET Parameter initialization CPARAM. INI CPARAM. INIDzone SET Speaker B set SP BAdvd DVD Remote Control FeaturesControl area Controlling this unitSetting manufacturer codes ManufacturerPress Learn again to exit from the setup mode Controlling other components MD/CDPress an input selector button to select a source component Programming codes from other remote controlsPress Learn using a ballpoint pen or similar object Learn is displayedChanging source names in the display window Press Clear to exit from the clearing mode Press Clear by using a ballpoint pen or similar objectPress u / d to select the clear mode Clearing function setsSelected component name appears in the display window Clearing individual functionsClearing a learned function Elements of a sound field What is a sound field Changing parameter settingsEditing Sound Field Parameters To reset all parameters Resetting parameters to the factory presetsTo reset a certain parameter Press u / d to select the parametersRoom SIZE/P. Room Size Room size INIT. DLY Initial delaySound Field Parameter Descriptions Room Size Surround room size INIT. DLY Surround initial delaySB INIT. DLY Surround back initial delay Liveness Surround livenessREV. Level Reverberation level REV.DELAY Reverberation delayREV.TIME Reverberation time CT Width Center width DIALG.LIFT Dialog liftFor 7ch Stereo For DTS Neo6 Music Image Center imageTroubleshooting GeneralOnly the speaker on Sound suddenlyGoes off One side can beRecord Volume level Or DTS indicator onVolume level is Dolby Digital or DTSTuner RX-V750 Function properly Remote controlDoes not work nor Does not learn newFactory Preset appears in the front panel display Resetting the Factory PresetsBe sure this unit is in standby mode Press Straight Effect to select the desired settingGlossary Audio formatsLFE 0.1 channel Sound field programsAudio information PCM Linear PCMComposite video signal Video signal informationComponent video signal Video signalSpecifications Audio SectionWC85520
Top Page Image Contents