ION DSP-AX750SE, RX-V750 owner manual Starting the setup, Automenu, Resultwiring

Page 29

Starting the setup

For best results, make sure the room is as quiet as possible during the auto setup procedure (YPAO). If there is too much ambient noise, the results may not be satisfactory.

y

If your subwoofer has adjustable volume and crossover/high cut frequency controls, set the volume between 9 and 11 o’clock (as viewed on a conventional clockface) and set the crossover/high cut frequency to the maximum.

VOLUME

CROSSOVER/

HIGH CUT

MIN

MAX

MIN

MAX

Subwoofer

1Switch on this unit and your video monitor.

Make sure the OSD is displayed.

2Press AMP.

AMP

3Press SET MENU.

SET MENU

MENU

A/B/C/D/E

4Press u / d to select AUTO SETUP.

 

+

 

SET MENU

 

TV VOL

 

CH

TV MUTE

CH

. ;AUTO

;MANUAL

–

+

SELECT

 

PRESET

 

PRESET

 

 

TV VOL

 

]/[p ]:Up/Down

 

 

 

 

–

 

 

5Press SELECT to enter AUTO SETUP.

+

TV VOL

CH

TV MUTE

CH

–

+

SELECT

PRESETPRESET

TV VOL

–

AUTO SETUP

6Press u / d to select SETUP, then press j / i to select the desired setting.

1 AUTO:MENU

. SETUP;;;;;;;AUTO START

all items [p]/[p]:Up/Down [<]/[>]:Select

AUTO To perform the auto setup procedure (YPAO).

RELOAD To reload the last auto setup (YPAO) settings to override any manual changes.

UNDO To undo the last auto setup (YPAO) and restore the previous settings.

DEFAULT To restore the factory preset (default) setup parameters.

y

You can choose RELOAD or UNDO only if you have already performed auto setup.

7Press dto select START, then press SELECT to start the setup procedure.

•If you selected AUTO in step 6, loud test tones will be output from each speaker in turn; WAIT appears during the auto setup procedure.

•If you selected DEFAULT, RELOAD or UNDO in step 6, no test tones are output.

1 AUTO:MENU

;;;;;;;AUTO

.

p

p

The RESULT:WIRING screen appears after all items have been measured and set.

RESULT:WIRING

FRONT L;;;;;;;OK

[<]/[>]:Select

[SELECT]:Return

•If an ERROR screen appears, see “If an error screen appears” on page 28.

•If a WARNING screen appears, see “If a warning

screen appears” on page 29.

PREPARATION

English

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DSP-AX750SE AV Amplifier Special Instructions for U.K. Model For U.K. customersContents Built-in 7-channel power amplifier FeaturesSound field features Other featuresInstalling batteries in the remote control Supplied accessoriesGetting Started Please check that you received all of the following partsFront panel Controls and FunctionsVideo AUX jacks RX-V750 Europe model onlyPhones Silent Cinema jack FM/AM RX-V750Remote control VOL -/+ RDS tuning buttonsSelect k/n Handling the remote control Using the remote controlFront panel display 96/24 indicator Optimizer indicatorLFE indicator Input channel indicatorsRear panel Speaker placement Speaker SetupTighten the knob to secure the wire Connecting to Presence speaker terminalsSpeaker connections 10 mmRight Left Subwoofer System Presence speakersRX-V750 Right Left Front Right Left Surround back Speakers Front speakers aCenter terminals Front terminalsSurround terminals SUB Woofer jackCable indications ConnectionsAnalog jacks Digital jacksConnections for DVD playback Connecting video componentsDVD player MonitorFor 8-channel input RX-V750 Connecting to the Multi CH Input jacksFor 6-channel input RX-V750 Use these jacks to connect any video source, such as a Connections for other video componentsVideo AUX jacks on the front panel Connecting a turntable Connecting audio componentsConnecting a tuner Connections for audio componentsConnecting to an external amplifier Frequency Step switch Asia and General models only Connecting the AM loop antennaIndoor FM antenna Included AM loop antenna included Ground GND terminalMemory back-up Connecting the power supply cordConnecting the AC power cord Impedance Selector switch Impedance Selector switchTurn on the video monitor connected to this unit Turning on the powerRX-V750 U.S.A. model Front panelOptimizer microphone setup Auto SetupIntroduction Optimizer microphone positionAutomenu Starting the setupResultwiring Error E-5 ErrorIf an error screen appears ResultexitResultwiring screen appears When you are finished, press SelectIf a warning screen appears Press u / d to select Result LIST, then press SelectErrors during auto setup Troubleshooting for auto setup procedureBefore auto setup Playback Adjust the volume to the desired output levelSelect the input source Start playback or select a broadcast stationTo adjust the tone To listen with headphones Silent CinemaPress Mute on the remote control Mute indicator blinks Select a sound field program if desiredMulti CH Input Selecting sound field programsSelecting Multi CH Input Front panel operationEnjoying multi-channel software Remote control operationDecoders select with j PLIIxMusicEnjoying 2-channel software Press q/DTS on the remote control to select the decoderPRO Logic SUR. Standard PRO Logic SUR. EnhancedListening to high fidelity stereo sound To cancel, press Pure Direct againNight listening modes Press Pure Direct to activate pure directSelecting input modes Listening to unprocessed input signalsStraight Downmixing to 2 channelsDisplaying information about the input Information about the input signalSource Press u / d to display the followingAutomatic tuning Tuning RX-V750Automatic and manual tuning Manual tuning Presetting stationsAutomatically presetting FM stations Press FM/AM to select the FM bandManually presetting stations Automatic preset tuning optionsWhen performing this operation with the remote Selecting preset stationsControl, first press Tuner to set the remote to tuner mode Press A/B/C/D/E to select the preset station groupSee Selecting preset stations Press PRESET/TUNING Edit againPTY Program Type mode PS Program Service name modeRT Radio Text mode CT Clock Time modePress PTY Seek Mode to set this unit To cancel this functionPTY Seek mode PTY Seek functionEON function Recording Special considerations when recording DTS softwareFor movie/video sources Sound Field Program DescriptionsSUR. Standard Dolby Digital Dolby DigitalSUR. Enhanced SUR. StandardSUR. Standard PRO Logic PRO LogicConcert Hall For music sourcesJazz Club Rock ConcertSetting the sleep timer Selecting the OSD mode Using the sleep timerAdvanced Operations P08 Movie TheaterPress j / i to adjust the speaker output level Canceling the sleep timerPress Select when you have completed your adjustment Sleep OFFPress AMP Press Test Using the test toneOutputting the test tone from the Presence speakers SET Menu Press u / d to select Manual Setup Using SET MenuPress Select to enter Manual Setup To exit, press SET Menu when finishedCenter SP Sound Menu 1/2Front SP Surr L/R SPPresence SP Surr B L/R SPLFE/BASS OUT Cross OverSpeaker distance CSP Distance 02ASUBWOOFER PhaseCSP Distance Elfe Level Dcenter GEQFdynamic Range Gaudio SETInput Menu HPR/SB SelectCMPNT-V Input Optical OUTCoaxial Binput ModeCinput Rename For Coaxial Input jacks 5Bmemory Guard Option MENU1/2Adisplay SET Dzone SET CPARAM. INIParameter initialization CPARAM. INI Speaker B set SP BControl area Remote Control FeaturesAdvd DVD Controlling this unitManufacturer Setting manufacturer codesPress Learn again to exit from the setup mode MD/CD Controlling other componentsPress Learn using a ballpoint pen or similar object Programming codes from other remote controlsPress an input selector button to select a source component Learn is displayedChanging source names in the display window Press u / d to select the clear mode Press Clear by using a ballpoint pen or similar objectPress Clear to exit from the clearing mode Clearing function setsSelected component name appears in the display window Clearing individual functionsClearing a learned function Elements of a sound field What is a sound field Changing parameter settingsEditing Sound Field Parameters To reset a certain parameter Resetting parameters to the factory presetsTo reset all parameters Press u / d to select the parametersRoom SIZE/P. Room Size Room size INIT. DLY Initial delaySound Field Parameter Descriptions SB INIT. DLY Surround back initial delay INIT. DLY Surround initial delayRoom Size Surround room size Liveness Surround livenessREV. Level Reverberation level REV.DELAY Reverberation delayREV.TIME Reverberation time For 7ch Stereo DIALG.LIFT Dialog liftCT Width Center width For DTS Neo6 Music Image Center imageGeneral TroubleshootingGoes off Sound suddenlyOnly the speaker on One side can beVolume level is Or DTS indicator onRecord Volume level Dolby Digital or DTSTuner RX-V750 Does not work nor Remote controlFunction properly Does not learn newBe sure this unit is in standby mode Resetting the Factory PresetsFactory Preset appears in the front panel display Press Straight Effect to select the desired settingAudio formats GlossaryAudio information Sound field programsLFE 0.1 channel PCM Linear PCMComponent video signal Video signal informationComposite video signal Video signalAudio Section SpecificationsWC85520
Top Page Image Contents